[PATCH V7 1/3] PCI: limit FLR wait time to 100ms maximum

[Bjorn Helgaas]

On Wed, Aug 02, 2017 at 03:15:15PM -0400, Sinan Kaya wrote:
> Code is currently allowing PCIe devices to extend polling time up to 1
> second. Reducing the wait time for virtual functions to 100ms maximum to
> satisfy spec requirement mentioned in PCIe r3.1, sec 6.6.2. Function-Level
> Reset (FLR).

This text suggests that the spec says we cannot wait more than 100ms.
That is not what the spec says.  There is no spec requirement to
*reduce* the wait time.

I haven't worked through all the details of what 6.6.2 says, but I
think it uses 100ms in the context of the *minimum* time software must
wait between initiating an FLR and initializing the function.

And of course, PCIe r3.1, sec 6.6.2, doesn't mention VFs at all.

> SR-IOV r1.1, sec 2.2.2 also mentions that the virtual function's presence
> from configuration space is not affected from FLR. There is no point in
> polling the command register since it should always return success.

My hypothesis was that CRS isn't useful on VFs because of sec 2.2.2
says "FLR ... does not affect its existence in PCI Configuration
Space".  But I think that hypothesis is wrong because sec 3.3.3.1
does talk about a VF returning CRS.

The SR-IOV spec (sec 3.4.1.1) says a VF's Vendor ID is read-only
0xffff.  But I expect CRS visibility (PCIe r3.1, sec 2.3.2) would work
normally and return a Vendor ID of 0x0001 to indicate CRS for a VF.

Of course, not all Root Ports support CRS software visibility, so
whatever we do has to work when it's absent.

> Signed-off-by: Sinan Kaya <okaya at codeaurora.org>
> ---
>  drivers/pci/pci.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index af0cc34..2ed604a 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -3812,7 +3812,7 @@ int pci_wait_for_pending_transaction(struct pci_dev *dev)
>  EXPORT_SYMBOL(pci_wait_for_pending_transaction);
>  
>  /*
> - * We should only need to wait 100ms after FLR, but some devices take longer.
> + * We should only need to wait 100ms after FLR for virtual functions.
>   * Wait for up to 1000ms for config space to return something other than -1.
>   * Intel IGD requires this when an LCD panel is attached.  We read the 2nd
>   * dword because VFs don't implement the 1st dword.
> @@ -3822,6 +3822,11 @@ static void pci_flr_wait(struct pci_dev *dev)
>  	int i = 0;
>  	u32 id;
>  
> +	if (dev->is_virtfn) {
> +		msleep(100);
> +		return;
> +	}
> +
>  	do {
>  		msleep(100);
>  		pci_read_config_dword(dev, PCI_COMMAND, &id);
> -- 
> 1.9.1
>