rk3288: mmcblk0: error -110 sending status command, retrying

Jagan Teki jagannadh.teki at gmail.com
Wed Aug 2 04:09:50 PDT 2017


Hi,

Did anyone observing error -110 and -84 during boot on rk3288 target?
full log here[1] and used dts node is[2].

Proper card detection is done, once we insert after console came-up
# [   39.635614] mmc0: card 59b4 removed
[   40.645537] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req
400000Hz, actual 400000HZ div = 0)
[   41.004559] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot
req 50000000Hz, actual 50000000HZ div = 0)
[   41.015553] mmc0: new high speed SDXC card at address 59b4
[   41.022015] mmcblk0: mmc0:59b4 MS    59.1 GiB
[   41.028458]  mmcblk0: p1 p2

Any help?

[1] https://paste.ubuntu.com/25225486/
[2] https://paste.ubuntu.com/25225915/

thanks!
-- 
Jagan Teki
Free Software Engineer | www.openedev.com
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.



More information about the linux-arm-kernel mailing list