[RFC PATCH v2 1/2] net: ethernet: nb8800: Reset HW block in ndo_open

Måns Rullgård mans at mansr.com
Wed Aug 2 04:02:31 PDT 2017


Mason <slash.tmp at free.fr> writes:

> Move all HW initializations to nb8800_init.
> This provides the basis for suspend/resume support.
> ---
>  drivers/net/ethernet/aurora/nb8800.c | 50 +++++++++++++++++-------------------
>  drivers/net/ethernet/aurora/nb8800.h |  1 +
>  2 files changed, 25 insertions(+), 26 deletions(-)

You're still not doing anything to preserve flow control and multicast
configuration, and those are probably not the only ones.

Worse, you're now never tearing down dma properly, which means the
hardware can be left with active pointers to memory no longer allocated
to it.

Finally, you still haven't explained why the hw needs to be reset in
ndo_open().  Whatever is causing your lockup can almost certainly be
triggered in some other way too.  I will not accept this side-stepping
of the issue.

> diff --git a/drivers/net/ethernet/aurora/nb8800.c b/drivers/net/ethernet/aurora/nb8800.c
> index e94159507847..aa18ea25d91f 100644
> --- a/drivers/net/ethernet/aurora/nb8800.c
> +++ b/drivers/net/ethernet/aurora/nb8800.c
> @@ -39,6 +39,7 @@
>
>  #include "nb8800.h"
>
> +static void nb8800_init(struct net_device *dev);
>  static void nb8800_tx_done(struct net_device *dev);
>  static int nb8800_dma_stop(struct net_device *dev);
>
> @@ -957,6 +958,8 @@ static int nb8800_open(struct net_device *dev)
>  	struct phy_device *phydev;
>  	int err;
>
> +	nb8800_init(dev);
> +
>  	/* clear any pending interrupts */
>  	nb8800_writel(priv, NB8800_RXC_SR, 0xf);
>  	nb8800_writel(priv, NB8800_TXC_SR, 0xf);
> @@ -1246,11 +1249,6 @@ static int nb8800_hw_init(struct net_device *dev)
>  	nb8800_writeb(priv, NB8800_PQ1, val >> 8);
>  	nb8800_writeb(priv, NB8800_PQ2, val & 0xff);
>
> -	/* Auto-negotiate by default */
> -	priv->pause_aneg = true;
> -	priv->pause_rx = true;
> -	priv->pause_tx = true;
> -
>  	nb8800_mc_init(dev, 0);
>
>  	return 0;
> @@ -1350,6 +1348,20 @@ static const struct of_device_id nb8800_dt_ids[] = {
>  };
>  MODULE_DEVICE_TABLE(of, nb8800_dt_ids);
>
> +static void nb8800_init(struct net_device *dev)
> +{
> +	struct nb8800_priv *priv = netdev_priv(dev);
> +	const struct nb8800_ops *ops = priv->ops;
> +
> +	if (ops && ops->reset)
> +		ops->reset(dev);
> +	nb8800_hw_init(dev);
> +	if (ops && ops->init)
> +		ops->init(dev);
> +	nb8800_update_mac_addr(dev);
> +	priv->speed = 0;
> +}
> +
>  static int nb8800_probe(struct platform_device *pdev)
>  {
>  	const struct of_device_id *match;
> @@ -1389,6 +1401,7 @@ static int nb8800_probe(struct platform_device *pdev)
>
>  	priv = netdev_priv(dev);
>  	priv->base = base;
> +	priv->ops = ops;
>
>  	priv->phy_mode = of_get_phy_mode(pdev->dev.of_node);
>  	if (priv->phy_mode < 0)
> @@ -1407,12 +1420,6 @@ static int nb8800_probe(struct platform_device *pdev)
>
>  	spin_lock_init(&priv->tx_lock);
>
> -	if (ops && ops->reset) {
> -		ret = ops->reset(dev);
> -		if (ret)
> -			goto err_disable_clk;
> -	}
> -
>  	bus = devm_mdiobus_alloc(&pdev->dev);
>  	if (!bus) {
>  		ret = -ENOMEM;
> @@ -1454,21 +1461,16 @@ static int nb8800_probe(struct platform_device *pdev)
>
>  	priv->mii_bus = bus;
>
> -	ret = nb8800_hw_init(dev);
> -	if (ret)
> -		goto err_deregister_fixed_link;
> -
> -	if (ops && ops->init) {
> -		ret = ops->init(dev);
> -		if (ret)
> -			goto err_deregister_fixed_link;
> -	}
> -
>  	dev->netdev_ops = &nb8800_netdev_ops;
>  	dev->ethtool_ops = &nb8800_ethtool_ops;
>  	dev->flags |= IFF_MULTICAST;
>  	dev->irq = irq;
>
> +	/* Auto-negotiate by default */
> +	priv->pause_aneg = true;
> +	priv->pause_rx = true;
> +	priv->pause_tx = true;
> +
>  	mac = of_get_mac_address(pdev->dev.of_node);
>  	if (mac)
>  		ether_addr_copy(dev->dev_addr, mac);
> @@ -1476,14 +1478,12 @@ static int nb8800_probe(struct platform_device *pdev)
>  	if (!is_valid_ether_addr(dev->dev_addr))
>  		eth_hw_addr_random(dev);
>
> -	nb8800_update_mac_addr(dev);
> -
>  	netif_carrier_off(dev);
>
>  	ret = register_netdev(dev);
>  	if (ret) {
>  		netdev_err(dev, "failed to register netdev\n");
> -		goto err_free_dma;
> +		goto err_deregister_fixed_link;
>  	}
>
>  	netif_napi_add(dev, &priv->napi, nb8800_poll, NAPI_POLL_WEIGHT);
> @@ -1492,8 +1492,6 @@ static int nb8800_probe(struct platform_device *pdev)
>
>  	return 0;
>
> -err_free_dma:
> -	nb8800_dma_free(dev);
>  err_deregister_fixed_link:
>  	if (of_phy_is_fixed_link(pdev->dev.of_node))
>  		of_phy_deregister_fixed_link(pdev->dev.of_node);
> diff --git a/drivers/net/ethernet/aurora/nb8800.h b/drivers/net/ethernet/aurora/nb8800.h
> index 6ec4a956e1e5..d5f4481a2c7b 100644
> --- a/drivers/net/ethernet/aurora/nb8800.h
> +++ b/drivers/net/ethernet/aurora/nb8800.h
> @@ -305,6 +305,7 @@ struct nb8800_priv {
>  	dma_addr_t			tx_desc_dma;
>
>  	struct clk			*clk;
> +	const struct nb8800_ops		*ops;
>  };
>
>  struct nb8800_ops {
> -- 
> 2.11.0

-- 
Måns Rullgård



More information about the linux-arm-kernel mailing list