[PATCH 1/6] dt-bindings: ti, edma: Add 66AK2G specific information

[Peter Ujfalusi]

On 2017-08-01 07:41, Lokesh Vutla wrote:
> Update ti,edma binding documentation to reflect 66AK2G specific
> properties.
>
> Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
> ---
>  Documentation/devicetree/bindings/dma/ti-edma.txt | 95 +++++++++++++++++++++--
>  1 file changed, 90 insertions(+), 5 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
> index 18090e7226b4..05fe2931d025 100644
> --- a/Documentation/devicetree/bindings/dma/ti-edma.txt
> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
> @@ -9,7 +9,12 @@ execute the actual DMA tansfer.
>  eDMA3 Channel Controller
>
>  Required properties:
> -- compatible:	"ti,edma3-tpcc" for the channel controller(s)
> +--------------------
> +- compatible:	Should be:
> +		- "ti,edma3-tpcc" for the channel controller(s) on OMAP,
> +		  AM33xx and AM43xx SoCs.
> +		- "ti,k2g-edma3-tpcc", "ti,edma3-tpcc" for the
> +		  channel controller(s) on 66AK2G.
>  - #dma-cells:	Should be set to <2>. The first number is the DMA request
>  		number and the second is the TC the channel is serviced on.
>  - reg:		Memory map of eDMA CC
> @@ -19,8 +24,19 @@ Required properties:
>  - ti,tptcs:	List of TPTCs associated with the eDMA in the following form:
>  		<&tptc_phandle TC_priority_number>. The highest priority is 0.
>
> +SoC-specific Required properties:
> +--------------------------------
> +The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only:
> +- ti,hwmods:	Name of the hwmods associated to the eDMA CC.
> +
> +The following are mandatory properties for 66AK2G SoCs only:
> +- power-domains:Should contain a phandle to a PM domain provider node
> +		and an args specifier containing the device id
> +		value. This property is as per the binding,
> +		Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
> +
>  Optional properties:
> -- ti,hwmods:	Name of the hwmods associated to the eDMA CC
> +-------------------
>  - ti,edma-memcpy-channels: List of channels allocated to be used for memcpy, iow
>  		these channels will be SW triggered channels. See example.
>  - ti,edma-reserved-slot-ranges: PaRAM slot ranges which should not be used by
> @@ -31,17 +47,34 @@ Optional properties:
>  eDMA3 Transfer Controller
>
>  Required properties:
> -- compatible:	"ti,edma3-tptc" for the transfer controller(s)
> +--------------------
> +- compatible:	Should be:
> +		- "ti,edma3-tptc" for the transfer controller(s) on OMAP,
> +		  AM33xx and AM43xx SoCs.
> +		- "ti,k2g-edma3-tptc", "ti,edma3-tptc" for the
> +		  transfer controller(s) on 66AK2G.
>  - reg:		Memory map of eDMA TC
>  - interrupts:	Interrupt number for TCerrint.
>
> +SoC-specific Required properties:
> +--------------------------------
> +The following are mandatory properties for OMAP, AM33xx and AM43xx SoCs only:
> +- ti,hwmods:	Name of the hwmods associated to the eDMA TC.
> +
> +The following are mandatory properties for 66AK2G SoCs only:
> +- power-domains:Should contain a phandle to a PM domain provider node
> +		and an args specifier containing the device id
> +		value. This property is as per the binding,
> +		Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
> +
>  Optional properties:
> -- ti,hwmods:	Name of the hwmods associated to the given eDMA TC
> +-------------------
>  - interrupt-names: "edma3_tcerrint"
>
>  ------------------------------------------------------------------------------
> -Example:
> +Examples:

Do we really need to expand the examples to have identical set, but with 
power-domains?

>
> +1.
>  edma: edma at 49000000 {
>  	compatible = "ti,edma3-tpcc";
>  	ti,hwmods = "tpcc";
> @@ -109,6 +142,58 @@ mcasp0: mcasp at 48038000 {
>  	dma-names = "tx", "rx";
>  };
>
> +2.
> +edma1: edma at 02728000 {
> +	compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
> +	reg =	<0x02728000 0x8000>;
> +	reg-names = "edma3_cc";
> +	interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
> +			<GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
> +			<GIC_SPI 220 IRQ_TYPE_EDGE_RISING>;
> +	interrupt-names = "edma3_ccint", "emda3_mperr",
> +			  "edma3_ccerrint";
> +	dma-requests = <64>;
> +	#dma-cells = <2>;
> +
> +	ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>;
> +
> +	/*
> +	 * memcpy is disabled, can be enabled with:
> +	 * ti,edma-memcpy-channels = <12 13 14 15>;
> +	 * for example.
> +	 */
> +
> +	power-domains = <&k2g_pds 0x4f>;
> +};
> +
> +edma1_tptc0: tptc at 027b0000 {
> +	compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
> +	reg =	<0x027b0000 0x400>;
> +	power-domains = <&k2g_pds 0x4f>;
> +};
> +
> +edma1_tptc1: tptc at 027b8000 {
> +	compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc";
> +	reg =	<0x027b8000 0x400>;
> +	power-domains = <&k2g_pds 0x4f>;
> +};
> +
> +mmc0: mmc at 23000000 {
> +	compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
> +	reg = <0x23000000 0x400>;
> +	interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
> +	dmas = <&edma1 24 0>, <&edma1 25 0>;
> +	dma-names = "tx", "rx";
> +	bus-width = <4>;
> +	ti,needs-special-reset;
> +	no-1-8-v;
> +	max-frequency = <96000000>;
> +	power-domains = <&k2g_pds 0xb>;
> +	clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
> +	clock-names = "fck", "mmchsdb_fck";
> +	status = "disabled";
> +};
> +
>  ------------------------------------------------------------------------------
>  DEPRECATED binding, new DTS files must use the ti,edma3-tpcc/ti,edma3-tptc
>  binding.
>

- Péter