[PATCH v2 13/30] arm: dts: mt7623: add usb nodes to the mt7623.dtsi file
sean.wang at mediatek.com
sean.wang at mediatek.com
Wed Apr 26 05:25:57 EDT 2017
From: John Crispin <john at phrozen.org>
Add USB nodes to the mt7623.dtsi file.
Signed-off-by: John Crispin <john at phrozen.org>
Signed-off-by: Sean Wang <sean.wang at mediatek.com>
---
arch/arm/boot/dts/mt7623.dtsi | 77 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 1ea9b18..56da5ba 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -377,12 +377,89 @@
status = "disabled";
};
+ usb1: usb at 1a1c0000 {
+ compatible = "mediatek,mt7623-xhci",
+ "mediatek,mt8173-xhci";
+ reg = <0 0x1a1c0000 0 0x1000>,
+ <0 0x1a1c4700 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
+ <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "sys_ck", "free_ck";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+ phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
+ status = "disabled";
+ };
+
+ u3phy1: usb-phy at 1a1c4000 {
+ compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ reg = <0 0x1a1c4000 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ u2port0: usb-phy at 1a1c4800 {
+ reg = <0 0x1a1c4800 0 0x0100>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u3port0: usb-phy at 1a1c4900 {
+ reg = <0 0x1a1c4900 0 0x0700>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
+ usb2: usb at 1a240000 {
+ compatible = "mediatek,mt7623-xhci",
+ "mediatek,mt8173-xhci";
+ reg = <0 0x1a240000 0 0x1000>,
+ <0 0x1a244700 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
+ <&topckgen CLK_TOP_ETHIF_SEL>;
+ clock-names = "sys_ck", "free_ck";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
+ phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
+ status = "disabled";
+ };
+
+ u3phy2: usb-phy at 1a244000 {
+ compatible = "mediatek,mt7623-u3phy", "mediatek,mt2701-u3phy";
+ reg = <0 0x1a244000 0 0x0700>;
+ clocks = <&clk26m>;
+ clock-names = "u3phya_ref";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ u2port1: usb-phy at 1a244800 {
+ reg = <0 0x1a244800 0 0x0100>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+
+ u3port1: usb-phy at 1a244900 {
+ reg = <0 0x1a244900 0 0x0700>;
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
hifsys: syscon at 1a000000 {
compatible = "mediatek,mt7623-hifsys",
"mediatek,mt2701-hifsys",
"syscon";
reg = <0 0x1a000000 0 0x1000>;
#clock-cells = <1>;
+ #reset-cells = <1>;
};
ethsys: syscon at 1b000000 {
--
1.9.1
More information about the linux-arm-kernel
mailing list