[PATCH v2 07/30] arm: dts: mt7623: add pinctrl nodes to the mt7623 dtsi file

[sean.wang at mediatek.com]

From: John Crispin <john at phrozen.org>

Add pin controller node to the mt7623.dtsi file

Signed-off-by: John Crispin <john at phrozen.org>
Signed-off-by: Sean Wang <sean.wang at mediatek.com>
---
 arch/arm/boot/dts/mt7623.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 3cc0a3a..1942bc7 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -15,7 +15,10 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/mt2701-clk.h>
+#include <dt-bindings/pinctrl/mt7623-pinfunc.h>
 #include <dt-bindings/power/mt2701-power.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
 #include <dt-bindings/reset/mt2701-resets.h>
 #include "skeleton64.dtsi"
 
@@ -107,6 +110,26 @@
 		#reset-cells = <1>;
 	};
 
+	pio: pinctrl at 10005000 {
+		compatible = "mediatek,mt7623-pinctrl",
+			     "mediatek,mt2701-pinctrl";
+		reg = <0 0x1000b000 0 0x1000>;
+		mediatek,pctl-regmap = <&syscfg_pctl_a>;
+		pins-are-numbered;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#interrupt-cells = <2>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	syscfg_pctl_a: syscfg at 10005000 {
+		compatible = "mediatek,mt7623-pctl-a-syscfg", "syscon";
+		reg = <0 0x10005000 0 0x1000>;
+	};
+
 	scpsys: scpsys at 10006000 {
 		compatible = "mediatek,mt7623-scpsys",
 			     "mediatek,mt2701-scpsys",
-- 
1.9.1