[PATCH 1/2] dt/bindings: Add bindings for Broadcom STB DRAM Sensors

[Markus Mayer]

Hi Rob,

On 18 April 2017 at 13:17, Markus Mayer <code at mmayer.net> wrote:
> From: Markus Mayer <mmayer at broadcom.com>
>
> Provide bindings for the Broadcom STB DDR PHY Front End (DPFE).

Would you be able to have a look at this binding? The driver won't be
upstreamed as hwmon driver (as per Guenter's comments). I am currently
converting the driver to a "soc" driver instead, but the proposed
binding remains unchanged.

If you have comments or suggestions, I would like to incorporate them
with the new series I will be sending out.

Thanks,
-Markus

> Signed-off-by: Markus Mayer <mmayer at broadcom.com>
> ---
>  .../devicetree/bindings/hwmon/brcmstb-dpfe.txt     | 68 ++++++++++++++++++++++
>  1 file changed, 68 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/hwmon/brcmstb-dpfe.txt
>
> diff --git a/Documentation/devicetree/bindings/hwmon/brcmstb-dpfe.txt b/Documentation/devicetree/bindings/hwmon/brcmstb-dpfe.txt
> new file mode 100644
> index 0000000..3519197
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/brcmstb-dpfe.txt
> @@ -0,0 +1,68 @@
> +DDR PHY Front End (DPFE) for Broadcom STB
> +=========================================
> +
> +DPFE and the DPFE firmware provide an interface for the host CPU to
> +communicate with the DCPU, which resides inside the DDR PHY.
> +
> +There are three memory regions for interacting with the DCPU.
> +
> +The DCPU Register Space
> +-----------------------
> +
> +Required properties:
> +  - compatible: must be one of brcm,bcm7271-dpfe-cpu, brcm,dpfe-cpu-v12.0.0.0
> +    or brcm,dpfe-cpu
> +  - reg: must reference the start address and length of the DCPU register
> +    space
> +
> +Optional properties:
> +  - cell-index: the index of the DPFE instance; will default to 0 if not set
> +
> +Example:
> +       dpfe_cpu0: dpfe-cpu at f1132000 {
> +               compatible = "brcm,bcm7271-dpfe-cpu",
> +                       "brcm,dpfe-cpu-v12.0.0.0",
> +                       "brcm,dpfe-cpu";
> +               reg = <0xf1132000 0x180>;
> +               cell-index = <0>;
> +       };
> +
> +The DCPU Data Memory Space
> +--------------------------
> +
> +Required properties:
> +  - compatible: must be one of brcm,bcm7271-dpfe-dmem, brcm,dpfe-dmem-v12.0.0.0
> +    or brcm,dpfe-dmem
> +  - reg: must reference the start address and length of the DCPU DMEM space
> +
> +Optional properties:
> +  - cell-index: the index of the DPFE instance; will default to 0 if not set
> +
> +Example:
> +       dpfe_dmem0: dpfe-dmem at f1134000 {
> +               compatible = "brcm,bcm7271-dpfe-dmem",
> +                       "brcm,dpfe-dmem-v12.0.0.0",
> +                       "brcm,dpfe-dmem";
> +               reg = <0xf1134000 0x1000>;
> +               cell-index = <0>;
> +       };
> +
> +The DCPU Instruction Memory Space
> +---------------------------------
> +
> +Required properties:
> +  - compatible: must be one of brcm,bcm7271-dpfe-imem, brcm,dpfe-imem-v12.0.0.0
> +    or brcm,dpfe-imem
> +  - reg: must reference the start address and length of the DCPU IMEM space
> +
> +Optional properties:
> +  - cell-index: the index of the DPFE instance; will default to 0 if not set
> +
> +Example:
> +       dpfe_imem0: dpfe-imem at f1138000 {
> +               compatible = "brcm,bcm7271-dpfe-imem",
> +                       "brcm,dpfe-imem-v12.0.0.0",
> +                       "brcm,dpfe-imem";
> +               reg = <0xf1138000 0x4000>;
> +               cell-index = <0>;
> +       };
> --
> 2.7.4
>