[PATCH] ARM/shmem: Drop page coloring align for non-VIPT CPUs

[Russell King - ARM Linux]

On Tue, Apr 25, 2017 at 08:19:21PM +0300, Dmitry Safonov wrote:
> On 04/14/2017 01:09 PM, Dmitry Safonov wrote:
> >On ARMv6 CPUs with VIPT caches there are aliasing issues: if two
> >different cache line indexes correspond to the same physical
> >address, then changes made to one of the alias might be lost
> >or they can overwrite each other. To overcome aliasing issues,
> >the align for shared mappings was introduced with:
> >
> >commit 4197692eef113eeb8e3e413cc70993a5e667e5b8
> >Author: Russell King <rmk at flint.arm.linux.org.uk>
> >Date:   Wed Apr 28 22:22:33 2004 +0100
> >
> >     [ARM] Fix shared mmap()ings for ARM VIPT caches.
> >
> >     This allows us to appropriately align shared mappings on VIPT caches
> >     with aliasing issues.
> >
> >Which introduced 4 pages align with SHMLBA, which resulted in
> >unique physical address after any tag in cache (because two upper bits
> >corresponding to page address get unused in tags).
> >
> >As this workaround is not needed by non-VIPT caches (like most armv7
> >CPUs which have PIPT caches), ARM mmap() code checks if cache is VIPT
> >aliasing for MAP_SHARED.
> >
> >The problem here is in shmat() syscall:
> >1. if shmaddr is NULL then do_shmat() uses arch_get_unmapped_area()
> >    to allocate shared mapping.
> >2. if shmaddr is specified then do_shmat() checks that address has
> >    SHMLBA alignment regardless to CPU cache aliasing.
> >
> >Which results on ARMv7 CPUs that shmat() with NULL shmaddr may return
> >non-SHMLBA aligned address (page-aligned), but shmat() with the same
> >address will fail.
> >
> >That is not critical issue for CRIU as after shmat() with NULL address,

CRIU?  Please try to keep use of acronyms to a minimum.

> >we can mremap() resulted shmem to restore shared memory mappings on the
> >same address where they were on checkpointing.
> >But it's still worth fixing because we can't reliably tell from
> >userspace if the platform has VIPT cache, and so this mremap()
> >workaround is done with HUGE warning that restoring application, that
> >uses SHMBLA-unaligned shmem on ARMv6 CPU with VIPT cache may result
> >in data corruptions.
> >
> >I also changed SHMLBA build-time check to init-time WARN_ON(), as
> >it's not constant afterward.

I'm not happy with this.  SHMLBA is defined by POSIX to be a constant,
which means that if we want to have any kind of binary compatibility
between different architecture versions, SHMLBA must be constant across
all variants of the architecture.

Making it dependent on the cache architecture means that userspace's
assumptions can be broken.  Increasing it is not an issue (since SHMLBA
is defined to be the address multiple - an address that is aligned to
4-page is also by definition aligned to 1-page.)  So what I did back in
2004 wasn't a problem.

However, reducing it (as you're now suggesting) is - newly built programs
are built today with:

#define SHMLBA              (__getpagesize () << 2)

so we must not allow the kernel to return addresses that violate that.
As I say, we can't reduce SHMLBA now.

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up
according to speedtest.net.