[PATCH v5 2/2] PCI: quirks: Fix ThunderX2 dma alias handling

[Jayachandran C]

On Fri, Apr 21, 2017 at 12:57:05PM -0500, Bjorn Helgaas wrote:
> On Fri, Apr 21, 2017 at 05:05:41PM +0000, Jayachandran C wrote:
> > On Fri, Apr 21, 2017 at 10:48:15AM -0500, Bjorn Helgaas wrote:
> > > On Mon, Apr 17, 2017 at 12:47 PM, Jayachandran C
> > > <jnair at caviumnetworks.com> wrote:
> > > > On Fri, Apr 14, 2017 at 09:00:06PM -0500, Bjorn Helgaas wrote:
> 
> > > >> Could you collect "lspci -vv" output from this system?  I'd like to
> > > >> archive that as background for this IOMMU issue and the ASPM tweaks I
> > > >> suspect we'll have to do.  I *wish* we had more information about that
> > > >> VIA thing, because I suspect we could get rid of it if we had more
> > > >> details.
> > > >
> > > > The full logs are slightly large, so I have kept them at:
> > > > https://github.com/jchandra-cavm/thunderx2/blob/master/logs/
> > > > The lspci -vv output is lspci-vv.txt and lspci -tvn output is lspci-tvn.txt
> > > >
> > > > The output is from 2 socket system, the cards are not on the first slot
> > > > like the example above, so the bus and device numbers are different.
> > > 
> > > Can somebody with this system collect the "lspci -xxxx" output as well?
> > > 
> > > I'm making some lspci changes to handle the PCI-to-PCIe bridge
> > > correctly, and I can use the "lspci -xxxx" output to create an lspci
> > > test case.
> > 
> > [Sorry was AFK for a few days]
> > 
> > I have updated the above directory with the log. Also tested your next branch
> > and it works fine on ThunderX2.
> 
> Thanks!
> 
> With regard to my lspci changes, they add "Slot-" here:
> 
>    01:0a.0 PCI bridge: Broadcom Corporation Device 9039
>    ...
>   -   Capabilities: [40] Express (v2) PCI/PCI-X to PCI-Express Bridge, MSI 00
>   +   Capabilities: [40] Express (v2) PCI/PCI-X to PCI-Express Bridge (Slot-), MSI 00
> 
> for all your PCI-to-PCIe bridges.  I assume the "Slot-" is correct, i.e.,
> the link is not connected to a slot, right?  This comes from the "Slot
> Implemented" bit in the PCIe Capabilities Register.

Yes, Slot- should be correct.
 
> I did notice that all the Root Port devices claim to *not* be connected to
> slots, which doesn't seem right.  For example,
> 
>   12:00.0 PCI bridge: Broadcom Corporation Device 9084
>       Bus: primary=12, secondary=13, subordinate=14, sec-latency=0
>       Capabilities: [ac] Express (v2) Root Port (Slot-), MSI 00
> 
>   13:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection
> 
> It seems strange because the 12:00.0 Root Port looks like it probably
> *does* lead to a slot where the NIC is plugged in.  Or is that NIC really
> soldered down?
> 
> But I assume there are *some* PCIe slots, so at some of those Root Ports
> should advertise "Slot+" (which by itself does not imply hotplug support,
> if that's the concern).

The Root Ports are connected to a slot, so I am not sure why the slot implemented
bit is not set. There seems to be nothing useful in the slot capabilites, so this
may be ok for now. I have reported this to the hardware team.

Thanks for the review and the comments,
JC.