[linux-sunxi] [PATCH v4 09/10] arm64: allwinner: a64: enable AXP803 regulators for Pine64

[Icenowy Zheng]

于 2017年4月25日 GMT+08:00 下午5:24:13, Andre Przywara <andre.przywara at arm.com> 写到:
>Hi,
>
>On 24/04/17 17:01, Icenowy Zheng wrote:
>> Add support of AXP803 regulators in the Pine64 device tree, in order
>to
>> enable many future functionalities, e.g. Wi-Fi.
>
>In general that's quite some code to just achieve some device power
>plane switching, but that's another discussion, I guess ;-)
>
>To me this patch here like a lot of churn to be duplicated in each
>board's DT.
>Can't we provide some sane defaults, either in axp803.dtsi or in an
>extra file (allwinner-ref-axp803.dtsi?), and only overwrite them in a
>board's DT if a board deviates?

For critical regulators you're right, however, peripherals' power seems to vary a lot, e.g. Wi-Fi and HDMI.

The DLDO1 for HDMI and DLDO4 for Wi-Fi design is only adopted by Pine64; according to BPi M64 schematics, Wi-Fi is DLDO2 and Wi-Fi IO voltage is DLDO4 (on Pine64 it's ELDO1 which is forced to be 1.8v because it's connected to CPVDD); on Orange Pi Win {,Plus} Wi-Fi is ALDO1, Wi-Fi IO is DLDO4 and HDMI is DLDO3.

>Because it seems like many boards are actually based on some Allwinner
>reference design and use very similar, if not identical settings.
>
>Also one thing below ...
>
>> 
>> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
>> ---
>>  .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 109
>+++++++++++++++++++++
>>  1 file changed, 109 insertions(+)
>> 
>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
>b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
>> index 3e1b44292534..abc1879e91f2 100644
>> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
>> @@ -106,6 +106,115 @@
>>  	};
>>  };
>>  
>> +#include "axp803.dtsi"
>> +
>> +&reg_aldo1 {
>> +	regulator-min-microvolt = <2800000>;
>> +	regulator-max-microvolt = <2800000>;
>> +	regulator-name = "vcc-csi";
>> +};
>> +
>> +&reg_aldo2 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <1800000>;
>> +	regulator-max-microvolt = <3300000>;
>> +	regulator-name = "vcc-pl";
>> +};
>> +
>> +&reg_aldo3 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <2700000>;
>> +	regulator-max-microvolt = <3300000>;
>> +	regulator-name = "vcc-pll-avcc";
>> +};
>> +
>> +&reg_dc1sw {
>> +	regulator-name = "vcc-phy";
>> +};
>> +
>> +&reg_dcdc1 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <3300000>;
>> +	regulator-max-microvolt = <3300000>;
>> +	regulator-name = "vcc-3v3";
>> +};
>> +
>> +&reg_dcdc2 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <1000000>;
>> +	regulator-max-microvolt = <1300000>;
>> +	regulator-name = "vdd-cpux";
>> +};
>> +
>> +/* DCDC3 is polyphased with DCDC2 */
>> +
>> +&reg_dcdc5 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <1500000>;
>> +	regulator-max-microvolt = <1500000>;
>
>On the Pine64 there is DDR3L DRAM, running at 1.35V.
>
>Cheers,
>Andre.
>
>
>> +	regulator-name = "vcc-dram";
>> +};
>> +
>> +&reg_dcdc6 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <1100000>;
>> +	regulator-max-microvolt = <1100000>;
>> +	regulator-name = "vdd-sys";
>> +};
>> +
>> +&reg_dldo1 {
>> +	regulator-min-microvolt = <3300000>;
>> +	regulator-max-microvolt = <3300000>;
>> +	regulator-name = "vcc-hdmi";
>> +};
>> +
>> +&reg_dldo2 {
>> +	regulator-min-microvolt = <3300000>;
>> +	regulator-max-microvolt = <3300000>;
>> +	regulator-name = "vcc-mipi";
>> +};
>> +
>> +&reg_dldo3 {
>> +	regulator-min-microvolt = <3300000>;
>> +	regulator-max-microvolt = <3300000>;
>> +	regulator-name = "avdd-csi";
>> +};
>> +
>> +&reg_dldo4 {
>> +	regulator-min-microvolt = <3300000>;
>> +	regulator-max-microvolt = <3300000>;
>> +	regulator-name = "vcc-wifi";
>> +};
>> +
>> +&reg_eldo1 {
>> +	regulator-min-microvolt = <1800000>;
>> +	regulator-max-microvolt = <1800000>;
>> +	regulator-name = "cpvdd";
>> +};
>> +
>> +&reg_eldo3 {
>> +	regulator-min-microvolt = <1800000>;
>> +	regulator-max-microvolt = <1800000>;
>> +	regulator-name = "vdd-1v8-csi";
>> +};
>> +
>> +&reg_fldo1 {
>> +	regulator-min-microvolt = <1200000>;
>> +	regulator-max-microvolt = <1200000>;
>> +	regulator-name = "vcc-1v2-hsic";
>> +};
>> +
>> +&reg_fldo2 {
>> +	regulator-always-on;
>> +	regulator-min-microvolt = <1100000>;
>> +	regulator-max-microvolt = <1100000>;
>> +	regulator-name = "vdd-cpus";
>> +};
>> +
>> +&reg_rtc_ldo {
>> +	regulator-name = "vcc-rtc";
>> +};
>> +
>>  &uart0 {
>>  	pinctrl-names = "default";
>>  	pinctrl-0 = <&uart0_pins_a>;
>>