[linux-sunxi] Re: [PATCH v4 07/10] mfd: axp20x: add axp20x-regulator cell for AXP803

Icenowy Zheng icenowy at aosc.io
Tue Apr 25 04:37:53 EDT 2017



于 2017年4月25日 GMT+08:00 下午3:57:17, Lee Jones <lee.jones at linaro.org> 写到:
>On Tue, 25 Apr 2017, Icenowy Zheng wrote:
>
>> As axp20x-regulator now supports AXP803, add a cell for it.
>> 
>> Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
>> Acked-by: Chen-Yu Tsai <wens at csie.org>
>> ---
>> Changes in v4:
>> - Added a trailing comma for new cell, for easier further cell
>addition.
>> Changes in v3:
>> - Make the new cell one-liner.
>> 
>>  drivers/mfd/axp20x.c                 | 3 ++-
>>  drivers/regulator/axp20x-regulator.c | 6 +++---
>
>These 2 changes are orthogonal, thus there is no reason to send them
>bundled into a single patch.  Doing so complicates things greatly.
>Please resubmit the two changes separately, so that they may be
>absorbed by our respective subsystems.

Yes. As Chen-Yu said, I wrongly squashed the regulator renaming patch here...

It should be squashed into the regulator patch.

Sorry for it.

>
>>  2 files changed, 5 insertions(+), 4 deletions(-)
>> 
>> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
>> index 1dc6235778eb..917b6ddc4f15 100644
>> --- a/drivers/mfd/axp20x.c
>> +++ b/drivers/mfd/axp20x.c
>> @@ -848,7 +848,8 @@ static struct mfd_cell axp803_cells[] = {
>>  		.name			= "axp20x-pek",
>>  		.num_resources		= ARRAY_SIZE(axp803_pek_resources),
>>  		.resources		= axp803_pek_resources,
>> -	}
>> +	},
>> +	{	.name			= "axp20x-regulator" },
>>  };
>>  
>>  static struct mfd_cell axp806_cells[] = {
>> diff --git a/drivers/regulator/axp20x-regulator.c
>b/drivers/regulator/axp20x-regulator.c
>> index 9356ec8a9a1f..e2608fe770b9 100644
>> --- a/drivers/regulator/axp20x-regulator.c
>> +++ b/drivers/regulator/axp20x-regulator.c
>> @@ -311,13 +311,13 @@ static const struct regulator_desc
>axp803_regulators[] = {
>>  		 AXP803_FLDO1_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(2)),
>>  	AXP_DESC(AXP803, FLDO2, "fldo2", "fldoin", 700, 1450, 50,
>>  		 AXP803_FLDO2_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(3)),
>> -	AXP_DESC_IO(AXP803, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
>> +	AXP_DESC_IO(AXP803, LDO_IO0, "ldo-io0", "ips", 700, 3300, 100,
>>  		    AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
>>  		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
>> -	AXP_DESC_IO(AXP803, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
>> +	AXP_DESC_IO(AXP803, LDO_IO1, "ldo-io1", "ips", 700, 3300, 100,
>>  		    AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
>>  		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
>> -	AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc_ldo", "ips", 3000),
>> +	AXP_DESC_FIXED(AXP803, RTC_LDO, "rtc-ldo", "ips", 3000),
>>  };
>>  
>>  static const struct regulator_linear_range axp806_dcdca_ranges[] = {



More information about the linux-arm-kernel mailing list