[PATCH] ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v4)
Olof Johansson
olof at lixom.net
Mon Apr 24 14:26:54 EDT 2017
Hi,
On Wed, Mar 29, 2017 at 5:26 PM, Eric Anholt <eric at anholt.net> wrote:
> Raspbian and Fedora have decided to support the Pi3 in 32-bit mode for
> now, so it's useful to be able to test that mode on an upstream
> kernel. It's also been useful for me to use the same board for 32-bit
> and 64-bit development.
>
> Signed-off-by: Eric Anholt <eric at anholt.net>
> ---
>
> v1: Gerd's patch that put the ../../../arm64/... link in the Makefile
> v2: Michael's patch that #included from ../../../arm64/... in a new
> bcm2837-rpi-3-b.dts.
> v3: Mine, using symlinks to make sure that we don't break the split DT
> tree.
> v4: Rely on the new include/arm64 symlink.
>
> Assuming positive review feedback, I assume it would be acceptable to
> merge the shared/dt-symlinks branch in a PR of my own for the 32-bit
> DT branch?
>
> arch/arm/boot/dts/Makefile | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 011808490fed..27d258cb50f2 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
> bcm2835-rpi-b-plus.dtb \
> bcm2835-rpi-a-plus.dtb \
> bcm2836-rpi-2-b.dtb \
> + include/arm64/broadcom/bcm2837-rpi-3-b.dtb \
Building straight out of (and into) the include dir is a little odd here.
A tiny wrapper *.dtb in this dir, that just includes a shared dts/dtsi
would be a lot nicer.
If you do that, we can still pick it up for 4.12.
-Olof
More information about the linux-arm-kernel
mailing list