[PATCH 1/5 v3] usb: host: add DT bindings for faraday fotg2
Hans Ulli Kroll
ulli.kroll at googlemail.com
Mon Apr 24 12:53:10 EDT 2017
Hi Linus
On Fri, 21 Apr 2017, Linus Walleij wrote:
> From: Hans Ulli Kroll <ulli.kroll at googlemail.com>
>
> This adds device tree bindings for the Faraday FOTG2
> dual-mode host controller.
>
> Cc: devicetree at vger.kernel.org
> Signed-off-by: Hans Ulli Kroll <ulli.kroll at googlemail.com>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
> ---
> ChangeLog v1->v3:
> - Change compatible to "faraday,fotg210" as the name of the
> hardware block.
> - Add an elaborate SoC-specific compatible string for the
> Cortina Systems Gemini so that SoC-specific features can
> be enabled.
> - Add cortina,gemini-mini-b to indicate a Gemini PHY with
> a Mini-B adapter connected.
> - Indicated that the Gemini version can handle "wakeup-source".
> - Add optional IP block clock.
> ---
> .../devicetree/bindings/usb/faraday,fotg210.txt | 35 ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/faraday,fotg210.txt
>
Got NAK'ed from Rob on some ealier round due missing "device mode" on this
IP. I've blatantly overrided this to a host only driver.
These are the needed changes in DT to support both modes
Note the -dr at the end of fotg210, to reflect this in an dual role device
diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
index cf06808303e2..862cda19e9d3 100644
--- a/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
+++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
@@ -13,6 +13,9 @@ Required properties:
Optional properties:
- clocks: should contain the IP block clock
- clock-names: should be "PCLK" for the IP block clock
+- dr_mode : indicates the working mode for "fotg210-dr" compatible
+ controllers. Can be "host", "peripheral". Default to
+ "host" if not defined for backward compatibility.
Required properties for "cortina,gemini-usb" compatible:
- syscon: a phandle to the system controller to access PHY registers
@@ -25,7 +28,7 @@ Optional properties for "cortina,gemini-usb" compatible:
Example for Gemini:
usb at 68000000 {
- compatible = "cortina,gemini-usb", "faraday,fotg210";
+ compatible = "cortina,gemini-usb", "faraday,fotg210-dr";
reg = <0x68000000 0x1000>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cc 12>;
More information about the linux-arm-kernel
mailing list