[RFC PATH] of/pci/dma: fix DMA configruation for PCI masters

[Rob Herring]

On Sat, Apr 22, 2017 at 3:08 AM, Oza Pawandeep <oza.oza at broadcom.com> wrote:
> current device frmework and of framework integration assumes dma-ranges
> in a way where memory-mapped devices define their dma-ranges.
> dma-ranges: (child-bus-address, parent-bus-address, length).
>
> but iproc based SOCs and other SOCs(suc as rcar) have PCI world dma-ranges.
> dma-ranges = <0x43000000 0x00 0x00 0x00 0x00 0x80 0x00>;
>
> of_dma_configure is specifically witten to take care of memory mapped devices.
> but no implementation exists for pci to take care of pcie based memory ranges.
> in fact pci world doesnt seem to define standard dma-ranges
>
> this patch served following purposes
>
> 1) exposes intrface to the pci host driver for thir inbound memory ranges
>
> 2) provide an interface to callers such as of_dma_get_ranges.
> so then the returned size get best possible (largest) dma_mask.
> for e.g.
> dma-ranges = <0x43000000 0x00 0x00 0x00 0x00 0x80 0x00>;
> we should get dev->coherent_dma_mask=0x7fffffffff.
>
> 3) this patch handles multiple inbound windows and dma-ranges.
> it is left to the caller, how it wants to use them.
> the new function returns the resources in a standard and unform way
>
> 4) this way the callers of of_dma_get_ranges does not need to change.
> and
>
> 5) leaves scope of adding PCI flag handling for inbound memory
> by the new function.
>
> Signed-off-by: Oza Pawandeep <oza.oza at broadcom.com>
>
> diff --git a/drivers/of/address.c b/drivers/of/address.c
> index 02b2903..ec21191 100644
> --- a/drivers/of/address.c
> +++ b/drivers/of/address.c
> @@ -6,6 +6,7 @@
>  #include <linux/ioport.h>
>  #include <linux/module.h>
>  #include <linux/of_address.h>
> +#include <linux/of_pci.h>
>  #include <linux/pci.h>
>  #include <linux/pci_regs.h>
>  #include <linux/sizes.h>
> @@ -829,10 +830,30 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
>         int len, naddr, nsize, pna;
>         int ret = 0;
>         u64 dmaaddr;
> +       struct resource_entry *window;
> +       LIST_HEAD(res);
>
>         if (!node)
>                 return -EINVAL;
>
> +       if (strcmp(np->name, "pci")) {

Using the name is not reliable though I did recently add a dtc check
for this. Of course, 'pcie' is valid too (and probably should be used
for what you are testing). type is what you want to use here. We
already have bus matching function and bus specific handlers in
address.c. Whatever solution you come up with should be integrated
with the existing bus specific handlers.

Rob