[PATCH] usb: chipidea: udc: fix NULL pointer dereference if udc_start failed

[Jisheng Zhang]

Fix below NULL pointer dereference. we set ci->roles[CI_ROLE_GADGET]
too early in ci_hdrc_gadget_init(), if udc_start() fails due to some
reason, the ci->roles[CI_ROLE_GADGET] check in  ci_hdrc_gadget_destroy
can't protect us.

We fix this issue by only setting ci->roles[CI_ROLE_GADGET] if
udc_start() succeed.

[    1.398550] Unable to handle kernel NULL pointer dereference at
virtual address 00000000
...
[    1.448600] PC is at dma_pool_free+0xb8/0xf0
[    1.453012] LR is at dma_pool_free+0x28/0xf0
[    2.113369] [<ffffff80081817d8>] dma_pool_free+0xb8/0xf0
[    2.118857] [<ffffff800841209c>] destroy_eps+0x4c/0x68
[    2.124165] [<ffffff8008413770>] ci_hdrc_gadget_destroy+0x28/0x50
[    2.130461] [<ffffff800840fa30>] ci_hdrc_probe+0x588/0x7e8
[    2.136129] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8
[    2.142066] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8
[    2.148270] [<ffffff800837f68c>] __device_attach_driver+0x9c/0xf8
[    2.154563] [<ffffff800837d570>] bus_for_each_drv+0x58/0x98
[    2.160317] [<ffffff800837f174>] __device_attach+0xc4/0x138
[    2.166072] [<ffffff800837f738>] device_initial_probe+0x10/0x18
[    2.172185] [<ffffff800837e58c>] bus_probe_device+0x94/0xa0
[    2.177940] [<ffffff800837c560>] device_add+0x3f0/0x560
[    2.183337] [<ffffff8008380d20>] platform_device_add+0x180/0x240
[    2.189541] [<ffffff800840f0e8>] ci_hdrc_add_device+0x440/0x4f8
[    2.195654] [<ffffff8008414194>] ci_hdrc_usb2_probe+0x13c/0x2d8
[    2.201769] [<ffffff8008380fb8>] platform_drv_probe+0x50/0xb8
[    2.207705] [<ffffff800837f494>] driver_probe_device+0x1fc/0x2a8
[    2.213910] [<ffffff800837f5ec>] __driver_attach+0xac/0xb0
[    2.219575] [<ffffff800837d4b0>] bus_for_each_dev+0x60/0xa0
[    2.225329] [<ffffff800837ec80>] driver_attach+0x20/0x28
[    2.230816] [<ffffff800837e880>] bus_add_driver+0x1d0/0x238
[    2.236571] [<ffffff800837fdb0>] driver_register+0x60/0xf8
[    2.242237] [<ffffff8008380ef4>] __platform_driver_register+0x44/0x50
[    2.248891] [<ffffff80086fd440>] ci_hdrc_usb2_driver_init+0x18/0x20
[    2.255365] [<ffffff8008082950>] do_one_initcall+0x38/0x128
[    2.261121] [<ffffff80086e0d00>] kernel_init_freeable+0x1ac/0x250
[    2.267414] [<ffffff800852f0b8>] kernel_init+0x10/0x100
[    2.272810] [<ffffff8008082680>] ret_from_fork+0x10/0x50

Signed-off-by: Jisheng Zhang <jszhang at marvell.com>
---
 drivers/usb/chipidea/udc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index f88e9157fad0..60a786c87c06 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1984,6 +1984,7 @@ static void udc_id_switch_for_host(struct ci_hdrc *ci)
 int ci_hdrc_gadget_init(struct ci_hdrc *ci)
 {
 	struct ci_role_driver *rdrv;
+	int ret;
 
 	if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
 		return -ENXIO;
@@ -1996,7 +1997,10 @@ int ci_hdrc_gadget_init(struct ci_hdrc *ci)
 	rdrv->stop	= udc_id_switch_for_host;
 	rdrv->irq	= udc_irq;
 	rdrv->name	= "gadget";
-	ci->roles[CI_ROLE_GADGET] = rdrv;
 
-	return udc_start(ci);
+	ret = udc_start(ci);
+	if (!ret)
+		ci->roles[CI_ROLE_GADGET] = rdrv;
+
+	return ret;
 }
-- 
2.11.0