[PULL 47/79] ARM: hyp-stub: improve ABI

[Christoffer Dall]

From: Russell King <rmk+kernel at armlinux.org.uk>

Improve the hyp-stub ABI to allow it to do more than just get/set the
vectors.  We follow the example in ARM64, where r0 is used as an opcode
with the other registers as an argument.

Tested-by: Keerthy <j-keerthy at ti.com>
Acked-by: Catalin Marinas <catalin.marinas at arm.com>
Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
Signed-off-by: Christoffer Dall <cdall at linaro.org>
---
 arch/arm/kernel/hyp-stub.S | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index 15d073a..f3e9ba5 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -22,6 +22,9 @@
 #include <asm/assembler.h>
 #include <asm/virt.h>
 
+#define HVC_GET_VECTORS 0
+#define HVC_SET_VECTORS 1
+
 #ifndef ZIMAGE
 /*
  * For the kernel proper, we need to find out the CPU boot mode long after
@@ -202,9 +205,19 @@ ARM_BE8(orr	r7, r7, #(1 << 25))     @ HSCTLR.EE
 ENDPROC(__hyp_stub_install_secondary)
 
 __hyp_stub_do_trap:
-	cmp	r0, #-1
-	mrceq	p15, 4, r0, c12, c0, 0	@ get HVBAR
-	mcrne	p15, 4, r0, c12, c0, 0	@ set HVBAR
+	teq	r0, #HVC_GET_VECTORS
+	bne	1f
+	mrc	p15, 4, r0, c12, c0, 0	@ get HVBAR
+	b	__hyp_stub_exit
+
+1:	teq	r0, #HVC_SET_VECTORS
+	bne	1f
+	mcr	p15, 4, r1, c12, c0, 0	@ set HVBAR
+	b	__hyp_stub_exit
+
+1:	mov	r0, #-1
+
+__hyp_stub_exit:
 	__ERET
 ENDPROC(__hyp_stub_do_trap)
 
@@ -231,10 +244,14 @@ ENDPROC(__hyp_stub_do_trap)
  * initialisation entry point.
  */
 ENTRY(__hyp_get_vectors)
-	mov	r0, #-1
+	mov	r0, #HVC_GET_VECTORS
+	__HVC(0)
+	ret	lr
 ENDPROC(__hyp_get_vectors)
-	@ fall through
+
 ENTRY(__hyp_set_vectors)
+	mov	r1, r0
+	mov	r0, #HVC_SET_VECTORS
 	__HVC(0)
 	ret	lr
 ENDPROC(__hyp_set_vectors)
-- 
2.9.0