[linux-sunxi] [PATCH v2 1/6] clk: sunxi-ng: Add sun4i/sun7i CCU driver

[Jonathan Liu]

Hi Priit,

On 27 March 2017 at 04:20, Priit Laes <plaes at plaes.org> wrote:
> +static struct ccu_nkmp pll_ve_clk = {
> +       .enable         = BIT(31),
> +       .n              = _SUNXI_CCU_MULT_OFFSET(8, 5, 0),
> +       .k              = _SUNXI_CCU_MULT(4, 2),
> +       .m              = _SUNXI_CCU_DIV(0, 2),
> +       .p              = _SUNXI_CCU_DIV(16, 2),
> +       .common         = {
> +               .reg            = 0x018,
> +               .hw.init        = CLK_HW_INIT("pll-ve",
> +                                             "hosc",
> +                                             &ccu_nkmp_ops,
> +                                             0),
> +       },
> +};

pll-ve is a NKMP clock in A10 but a NK clock in A20.

> +static const char *const hdmi_parents[] = { "pll-video0", "pll-video0-2x",
> +                                           "pll-vide01", "pll-video1-2x" };

"pll-vide01" should be "pll-video1".

Regards,
Jonathan