[PATCH 1/5 v3] usb: host: add DT bindings for faraday fotg2
Linus Walleij
linus.walleij at linaro.org
Fri Apr 21 16:40:54 EDT 2017
From: Hans Ulli Kroll <ulli.kroll at googlemail.com>
This adds device tree bindings for the Faraday FOTG2
dual-mode host controller.
Cc: devicetree at vger.kernel.org
Signed-off-by: Hans Ulli Kroll <ulli.kroll at googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
ChangeLog v1->v3:
- Change compatible to "faraday,fotg210" as the name of the
hardware block.
- Add an elaborate SoC-specific compatible string for the
Cortina Systems Gemini so that SoC-specific features can
be enabled.
- Add cortina,gemini-mini-b to indicate a Gemini PHY with
a Mini-B adapter connected.
- Indicated that the Gemini version can handle "wakeup-source".
- Add optional IP block clock.
---
.../devicetree/bindings/usb/faraday,fotg210.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/faraday,fotg210.txt
diff --git a/Documentation/devicetree/bindings/usb/faraday,fotg210.txt b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
new file mode 100644
index 000000000000..cf06808303e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
@@ -0,0 +1,35 @@
+Faraday FOTG Host controller
+
+This OTG-capable USB host controller is found in Cortina Systems
+Gemini and other SoC products.
+
+Required properties:
+- compatible: should be one of:
+ "faraday,fotg210"
+ "cortina,gemini-usb", "faraday,fotg210"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+
+Optional properties:
+- clocks: should contain the IP block clock
+- clock-names: should be "PCLK" for the IP block clock
+
+Required properties for "cortina,gemini-usb" compatible:
+- syscon: a phandle to the system controller to access PHY registers
+
+Optional properties for "cortina,gemini-usb" compatible:
+- cortina,gemini-mini-b: boolean property that indicates that a Mini-B
+ OTH connector is in use
+- wakeup-source: see power/wakeup-source.txt
+
+Example for Gemini:
+
+usb at 68000000 {
+ compatible = "cortina,gemini-usb", "faraday,fotg210";
+ reg = <0x68000000 0x1000>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cc 12>;
+ clock-names = "PCLK";
+ syscon = <&syscon>;
+ wakeup-source;
+};
--
2.9.3
More information about the linux-arm-kernel
mailing list