[PATCH V5 3/7] ARM: exynos: Use - instead of @ for DT OPP entries

[Viresh Kumar]

On 20-04-17, 18:09, Krzysztof Kozlowski wrote:
> On Thu, Apr 20, 2017 at 04:25:07PM +0530, Viresh Kumar wrote:
> > Compiling the DT file with W=1, DTC warns like follows:
> > 
> > Warning (unit_address_vs_reg): Node /opp_table0/opp at 1000000000 has a
> > unit name, but no reg property
> > 
> > Fix this by replacing '@' with '-' as the OPP nodes will never have a
> > "reg" property.
> > 
> > Reported-by: Krzysztof Kozlowski <krzk at kernel.org>
> > Reported-by: Masahiro Yamada <yamada.masahiro at socionext.com>
> > Suggested-by: Mark Rutland <mark.rutland at arm.com>
> > Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
> > Reviewed-by: Chanwoo Choi <cw00.choi at samsung.com>
> > Reviewed-by: Krzysztof Kozlowski <krzk at kernel.org>
> > Acked-by: Rob Herring <robh at kernel.org>
> > ---
> >  .../devicetree/bindings/devfreq/exynos-bus.txt     | 46 +++++++--------
> >  arch/arm/boot/dts/exynos3250.dtsi                  | 46 +++++++--------
> >  arch/arm/boot/dts/exynos4210.dtsi                  | 32 +++++------
> >  arch/arm/boot/dts/exynos4412-prime.dtsi            |  4 +-
> >  arch/arm/boot/dts/exynos4412.dtsi                  | 66 +++++++++++-----------
> >  arch/arm/boot/dts/exynos5420.dtsi                  | 40 ++++++-------
> >  arch/arm/boot/dts/exynos5800.dtsi                  | 56 +++++++++---------
> >  arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi     | 48 ++++++++--------
> >  arch/arm64/boot/dts/exynos/exynos5433.dtsi         | 50 ++++++++--------
> >  9 files changed, 194 insertions(+), 194 deletions(-)
> 
> 
> Thanks, split ARM64 from ARM and applied (for v4.12). arm-soc keeps DTS
> separated between ARM architectures. Technically this should require a
> resend but we had way too many resends for this simple patch.

Bah! Will make sure to send separate patches from now on. Thanks.

-- 
viresh