[PATCH V5 7/7] ARM: ZTE: Use - instead of @ for DT OPP entries

[Viresh Kumar]

Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp at 1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski <krzk at kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro at socionext.com>
Suggested-by: Mark Rutland <mark.rutland at arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
Acked-by: Rob Herring <robh at kernel.org>
---
 arch/arm64/boot/dts/zte/zx296718.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi
index 316dc713268c..d83bf789c864 100644
--- a/arch/arm64/boot/dts/zte/zx296718.dtsi
+++ b/arch/arm64/boot/dts/zte/zx296718.dtsi
@@ -118,27 +118,27 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp at 500000000 {
+		opp-500000000 {
 			opp-hz = /bits/ 64 <500000000>;
 			clock-latency-ns = <500000>;
 		};
 
-		opp at 648000000 {
+		opp-648000000 {
 			opp-hz = /bits/ 64 <648000000>;
 			clock-latency-ns = <500000>;
 		};
 
-		opp at 800000000 {
+		opp-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 			clock-latency-ns = <500000>;
 		};
 
-		opp at 1000000000 {
+		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			clock-latency-ns = <500000>;
 		};
 
-		opp at 1188000000 {
+		opp-1188000000 {
 			opp-hz = /bits/ 64 <1188000000>;
 			clock-latency-ns = <500000>;
 		};
-- 
2.12.0.432.g71c3a4f4ba37