[PATCH V4 2/7] ARM: TI: Use - instead of @ for DT OPP entries

Viresh Kumar viresh.kumar at linaro.org
Thu Apr 20 01:44:13 EDT 2017


Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp at 1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski <krzk at kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro at socionext.com>
Suggested-by: Mark Rutland <mark.rutland at arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar at linaro.org>
Acked-by: Rob Herring <robh at kernel.org>
Acked-by: Tony Lindgren <tony at atomide.com>
---
 .../devicetree/bindings/cpufreq/ti-cpufreq.txt       | 20 ++++++++++----------
 arch/arm/boot/dts/am4372.dtsi                        | 10 +++++-----
 2 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
index ba0e15ad5bd9..0c38e4b8fc51 100644
--- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
@@ -63,64 +63,64 @@ cpu0_opp_table: opp-table {
 	 * because they can not be enabled simultaneously on a
 	 * single SoC.
 	 */
-	opp50 at 300000000 {
+	opp50-300000000 {
 		opp-hz = /bits/ 64 <300000000>;
 		opp-microvolt = <950000 931000 969000>;
 		opp-supported-hw = <0x06 0x0010>;
 		opp-suspend;
 	};
 
-	opp100 at 275000000 {
+	opp100-275000000 {
 		opp-hz = /bits/ 64 <275000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x01 0x00FF>;
 		opp-suspend;
 	};
 
-	opp100 at 300000000 {
+	opp100-300000000 {
 		opp-hz = /bits/ 64 <300000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x06 0x0020>;
 		opp-suspend;
 	};
 
-	opp100 at 500000000 {
+	opp100-500000000 {
 		opp-hz = /bits/ 64 <500000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x01 0xFFFF>;
 	};
 
-	opp100 at 600000000 {
+	opp100-600000000 {
 		opp-hz = /bits/ 64 <600000000>;
 		opp-microvolt = <1100000 1078000 1122000>;
 		opp-supported-hw = <0x06 0x0040>;
 	};
 
-	opp120 at 600000000 {
+	opp120-600000000 {
 		opp-hz = /bits/ 64 <600000000>;
 		opp-microvolt = <1200000 1176000 1224000>;
 		opp-supported-hw = <0x01 0xFFFF>;
 	};
 
-	opp120 at 720000000 {
+	opp120-720000000 {
 		opp-hz = /bits/ 64 <720000000>;
 		opp-microvolt = <1200000 1176000 1224000>;
 		opp-supported-hw = <0x06 0x0080>;
 	};
 
-	oppturbo at 720000000 {
+	oppturbo-720000000 {
 		opp-hz = /bits/ 64 <720000000>;
 		opp-microvolt = <1260000 1234800 1285200>;
 		opp-supported-hw = <0x01 0xFFFF>;
 	};
 
-	oppturbo at 800000000 {
+	oppturbo-800000000 {
 		opp-hz = /bits/ 64 <800000000>;
 		opp-microvolt = <1260000 1234800 1285200>;
 		opp-supported-hw = <0x06 0x0100>;
 	};
 
-	oppnitro at 1000000000 {
+	oppnitro-1000000000 {
 		opp-hz = /bits/ 64 <1000000000>;
 		opp-microvolt = <1325000 1298500 1351500>;
 		opp-supported-hw = <0x04 0x0200>;
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 97fcaf415de1..1532ffe1de63 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -60,32 +60,32 @@
 	cpu0_opp_table: opp_table0 {
 		compatible = "operating-points-v2";
 
-		opp50 at 300000000 {
+		opp50-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <950000 931000 969000>;
 			opp-supported-hw = <0xFF 0x01>;
 			opp-suspend;
 		};
 
-		opp100 at 600000000 {
+		opp100-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <1100000 1078000 1122000>;
 			opp-supported-hw = <0xFF 0x04>;
 		};
 
-		opp120 at 720000000 {
+		opp120-720000000 {
 			opp-hz = /bits/ 64 <720000000>;
 			opp-microvolt = <1200000 1176000 1224000>;
 			opp-supported-hw = <0xFF 0x08>;
 		};
 
-		oppturbo at 800000000 {
+		oppturbo-800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1260000 1234800 1285200>;
 			opp-supported-hw = <0xFF 0x10>;
 		};
 
-		oppnitro at 1000000000 {
+		oppnitro-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1325000 1298500 1351500>;
 			opp-supported-hw = <0xFF 0x20>;
-- 
2.12.0.432.g71c3a4f4ba37




More information about the linux-arm-kernel mailing list