[PATCH V5 1/4] arm64: dts: Add basic DT to support Spreadtrum's SP9860G
Chunyan Zhang
zhang.lyra at gmail.com
Wed Apr 19 09:12:35 EDT 2017
Hi Arnd, Olof
Could you please take this patch through arm-soc git if there are no
further comments? (The three other patches in this series have been
taken by Greg.)
Thanks,
Chunyan
On 27 March 2017 at 15:32, Chunyan Zhang <chunyan.zhang at spreadtrum.com> wrote:
> From: Orson Zhai <orson.zhai at spreadtrum.com>
>
> SC9860G is a 8 cores of A53 SoC with 4G LTE support SoC from Spreadtrum.
>
> According to regular hierarchy of sprd dts, whale2.dtsi contains SoC
> peripherals IP nodes, sc9860.dtsi contains stuff related to ARM core stuff
> and sp9860g dts is for the board level.
>
> Signed-off-by: Orson Zhai <orson.zhai at spreadtrum.com>
> Signed-off-by: Chunyan Zhang <chunyan.zhang at spreadtrum.com>
> Reviewed-by: Mathieu Poirier <mathieu.poirier at linaro.org>
> ---
> arch/arm64/boot/dts/sprd/Makefile | 3 +-
> arch/arm64/boot/dts/sprd/sc9860.dtsi | 569 ++++++++++++++++++++++++++++++
> arch/arm64/boot/dts/sprd/sp9860g-1h10.dts | 56 +++
> arch/arm64/boot/dts/sprd/whale2.dtsi | 71 ++++
> 4 files changed, 698 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm64/boot/dts/sprd/sc9860.dtsi
> create mode 100644 arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
> create mode 100644 arch/arm64/boot/dts/sprd/whale2.dtsi
>
> diff --git a/arch/arm64/boot/dts/sprd/Makefile b/arch/arm64/boot/dts/sprd/Makefile
> index b658c5e..f0535e6 100644
> --- a/arch/arm64/boot/dts/sprd/Makefile
> +++ b/arch/arm64/boot/dts/sprd/Makefile
> @@ -1,4 +1,5 @@
> -dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb
> +dtb-$(CONFIG_ARCH_SPRD) += sc9836-openphone.dtb \
> + sp9860g-1h10.dtb
>
> always := $(dtb-y)
> subdir-y := $(dts-dirs)
> diff --git a/arch/arm64/boot/dts/sprd/sc9860.dtsi b/arch/arm64/boot/dts/sprd/sc9860.dtsi
> new file mode 100644
> index 0000000..7b7d8ce
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd/sc9860.dtsi
> @@ -0,0 +1,569 @@
> +/*
> + * Spreadtrum SC9860 SoC
> + *
> + * Copyright (C) 2016, Spreadtrum Communications Inc.
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "whale2.dtsi"
> +
> +/ {
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&CPU0>;
> + };
> + core1 {
> + cpu = <&CPU1>;
> + };
> + core2 {
> + cpu = <&CPU2>;
> + };
> + core3 {
> + cpu = <&CPU3>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&CPU4>;
> + };
> + core1 {
> + cpu = <&CPU5>;
> + };
> + core2 {
> + cpu = <&CPU6>;
> + };
> + core3 {
> + cpu = <&CPU7>;
> + };
> + };
> + };
> +
> + CPU0: cpu at 530000 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x530000>;
> + enable-method = "psci";
> + cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> + };
> +
> + CPU1: cpu at 530001 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x530001>;
> + enable-method = "psci";
> + cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> + };
> +
> + CPU2: cpu at 530002 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x530002>;
> + enable-method = "psci";
> + cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> + };
> +
> + CPU3: cpu at 530003 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x530003>;
> + enable-method = "psci";
> + cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> + };
> +
> + CPU4: cpu at 530100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x530100>;
> + enable-method = "psci";
> + cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> + };
> +
> + CPU5: cpu at 530101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x530101>;
> + enable-method = "psci";
> + cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> + };
> +
> + CPU6: cpu at 530102 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x530102>;
> + enable-method = "psci";
> + cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> + };
> +
> + CPU7: cpu at 530103 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53", "arm,armv8";
> + reg = <0x0 0x530103>;
> + enable-method = "psci";
> + cpu-idle-states = <&CORE_PD &CLUSTER_PD>;
> + };
> + };
> +
> + idle-states{
> + entry-method = "arm,psci";
> +
> + CORE_PD: core_pd {
> + compatible = "arm,idle-state";
> + entry-latency-us = <1000>;
> + exit-latency-us = <700>;
> + min-residency-us = <2500>;
> + local-timer-stop;
> + arm,psci-suspend-param = <0x00010002>;
> + };
> +
> + CLUSTER_PD: cluster_pd {
> + compatible = "arm,idle-state";
> + entry-latency-us = <1000>;
> + exit-latency-us = <1000>;
> + min-residency-us = <3000>;
> + local-timer-stop;
> + arm,psci-suspend-param = <0x01010003>;
> + };
> + };
> +
> + gic: interrupt-controller at 12001000 {
> + compatible = "arm,gic-400";
> + reg = <0 0x12001000 0 0x1000>,
> + <0 0x12002000 0 0x2000>,
> + <0 0x12004000 0 0x2000>,
> + <0 0x12006000 0 0x2000>;
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8)
> + | IRQ_TYPE_LEVEL_HIGH)>;
> + };
> +
> + psci {
> + compatible = "arm,psci-0.2";
> + method = "smc";
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8)
> + | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8)
> + | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8)
> + | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8)
> + | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +
> + pmu {
> + compatible = "arm,cortex-a53-pmu", "arm,armv8-pmuv3";
> + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-affinity = <&CPU0>,
> + <&CPU1>,
> + <&CPU2>,
> + <&CPU3>,
> + <&CPU4>,
> + <&CPU5>,
> + <&CPU6>,
> + <&CPU7>;
> + };
> +
> + soc {
> + funnel at 10001000 { /* SoC Funnel */
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0 0x10001000 0 0x1000>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + soc_funnel_out_port: endpoint {
> + remote-endpoint = <&etb_in>;
> + };
> + };
> +
> + port at 1 {
> + reg = <0>;
> + soc_funnel_in_port0: endpoint {
> + slave-mode;
> + remote-endpoint =
> + <&main_funnel_out_port>;
> + };
> + };
> +
> + port at 2 {
> + reg = <4>;
> + soc_funnel_in_port1: endpoint {
> + slave-mode;
> + remote-endpioint =
> + <&stm_out_port>;
> + };
> + };
> + };
> + };
> +
> + etb at 10003000 {
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0 0x10003000 0 0x1000>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> + port {
> + etb_in: endpoint {
> + slave-mode;
> + remote-endpoint =
> + <&soc_funnel_out_port>;
> + };
> + };
> + };
> +
> + stm at 10006000 {
> + compatible = "arm,coresight-stm", "arm,primecell";
> + reg = <0 0x10006000 0 0x1000>,
> + <0 0x01000000 0 0x180000>;
> + reg-names = "stm-base", "stm-stimulus-base";
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> + port {
> + stm_out_port: endpoint {
> + remote-endpoint =
> + <&soc_funnel_in_port1>;
> + };
> + };
> + };
> +
> + funnel at 11001000 { /* Cluster0 Funnel */
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0 0x11001000 0 0x1000>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + cluster0_funnel_out_port: endpoint {
> + remote-endpoint =
> + <&cluster0_etf_in>;
> + };
> + };
> +
> + port at 1 {
> + reg = <0>;
> + cluster0_funnel_in_port0: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm0_out>;
> + };
> + };
> +
> + port at 2 {
> + reg = <1>;
> + cluster0_funnel_in_port1: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm1_out>;
> + };
> + };
> +
> + port at 3 {
> + reg = <2>;
> + cluster0_funnel_in_port2: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm2_out>;
> + };
> + };
> +
> + port at 4 {
> + reg = <4>;
> + cluster0_funnel_in_port3: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm3_out>;
> + };
> + };
> + };
> + };
> +
> + funnel at 11002000 { /* Cluster1 Funnel */
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0 0x11002000 0 0x1000>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + cluster1_funnel_out_port: endpoint {
> + remote-endpoint =
> + <&cluster1_etf_in>;
> + };
> + };
> +
> + port at 1 {
> + reg = <0>;
> + cluster1_funnel_in_port0: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm4_out>;
> + };
> + };
> +
> + port at 2 {
> + reg = <1>;
> + cluster1_funnel_in_port1: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm5_out>;
> + };
> + };
> +
> + port at 3 {
> + reg = <2>;
> + cluster1_funnel_in_port2: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm6_out>;
> + };
> + };
> +
> + port at 4 {
> + reg = <3>;
> + cluster1_funnel_in_port3: endpoint {
> + slave-mode;
> + remote-endpoint = <&etm7_out>;
> + };
> + };
> + };
> + };
> +
> + etf at 11003000 { /* ETF on Cluster0 */
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0 0x11003000 0 0x1000>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + cluster0_etf_out: endpoint {
> + remote-endpoint =
> + <&main_funnel_in_port0>;
> + };
> + };
> +
> + port at 1 {
> + reg = <0>;
> + cluster0_etf_in: endpoint {
> + slave-mode;
> + remote-endpoint =
> + <&cluster0_funnel_out_port>;
> + };
> + };
> + };
> + };
> +
> + etf at 11004000 { /* ETF on Cluster1 */
> + compatible = "arm,coresight-tmc", "arm,primecell";
> + reg = <0 0x11004000 0 0x1000>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + cluster1_etf_out: endpoint {
> + remote-endpoint =
> + <&main_funnel_in_port1>;
> + };
> + };
> +
> + port at 1 {
> + reg = <0>;
> + cluster1_etf_in: endpoint {
> + slave-mode;
> + remote-endpoint =
> + <&cluster1_funnel_out_port>;
> + };
> + };
> + };
> + };
> +
> + funnel at 11005000 { /* Main Funnel */
> + compatible = "arm,coresight-funnel", "arm,primecell";
> + reg = <0 0x11005000 0 0x1000>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + main_funnel_out_port: endpoint {
> + remote-endpoint =
> + <&soc_funnel_in_port0>;
> + };
> + };
> +
> + port at 1 {
> + reg = <0>;
> + main_funnel_in_port0: endpoint {
> + slave-mode;
> + remote-endpoint =
> + <&cluster0_etf_out>;
> + };
> + };
> +
> + port at 2 {
> + reg = <1>;
> + main_funnel_in_port1: endpoint {
> + slave-mode;
> + remote-endpoint =
> + <&cluster1_etf_out>;
> + };
> + };
> + };
> + };
> +
> + etm at 11440000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x11440000 0 0x1000>;
> + cpu = <&CPU0>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> +
> + port {
> + etm0_out: endpoint {
> + remote-endpoint =
> + <&cluster0_funnel_in_port0>;
> + };
> + };
> + };
> +
> + etm at 11540000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x11540000 0 0x1000>;
> + cpu = <&CPU1>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> +
> + port {
> + etm1_out: endpoint {
> + remote-endpoint =
> + <&cluster0_funnel_in_port1>;
> + };
> + };
> + };
> +
> + etm at 11640000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x11640000 0 0x1000>;
> + cpu = <&CPU2>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> +
> + port {
> + etm2_out: endpoint {
> + remote-endpoint =
> + <&cluster0_funnel_in_port2>;
> + };
> + };
> + };
> +
> + etm at 11740000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x11740000 0 0x1000>;
> + cpu = <&CPU3>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> +
> + port {
> + etm3_out: endpoint {
> + remote-endpoint =
> + <&cluster0_funnel_in_port3>;
> + };
> + };
> + };
> +
> + etm at 11840000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x11840000 0 0x1000>;
> + cpu = <&CPU4>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> +
> + port {
> + etm4_out: endpoint {
> + remote-endpoint =
> + <&cluster1_funnel_in_port0>;
> + };
> + };
> + };
> +
> + etm at 11940000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x11940000 0 0x1000>;
> + cpu = <&CPU5>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> +
> + port {
> + etm5_out: endpoint {
> + remote-endpoint =
> + <&cluster1_funnel_in_port1>;
> + };
> + };
> + };
> +
> + etm at 11a40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x11a40000 0 0x1000>;
> + cpu = <&CPU6>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> +
> + port {
> + etm6_out: endpoint {
> + remote-endpoint =
> + <&cluster1_funnel_in_port2>;
> + };
> + };
> + };
> +
> + etm at 11b40000 {
> + compatible = "arm,coresight-etm4x", "arm,primecell";
> + reg = <0 0x11b40000 0 0x1000>;
> + cpu = <&CPU7>;
> + clocks = <&ext_26m>;
> + clock-names = "apb_pclk";
> +
> + port {
> + etm7_out: endpoint {
> + remote-endpoint =
> + <&cluster1_funnel_in_port3>;
> + };
> + };
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
> new file mode 100644
> index 0000000..ae0b28c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd/sp9860g-1h10.dts
> @@ -0,0 +1,56 @@
> +/*
> + * Spreadtrum SP9860g board
> + *
> + * Copyright (C) 2017, Spreadtrum Communications Inc.
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> + */
> +
> +/dts-v1/;
> +
> +#include "sc9860.dtsi"
> +
> +/ {
> + model = "Spreadtrum SP9860G 3GFHD Board";
> +
> + compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
> +
> + aliases {
> + serial0 = &uart0; /* for Bluetooth */
> + serial1 = &uart1; /* UART console */
> + serial2 = &uart2; /* Reserved */
> + serial3 = &uart3; /* for GPS */
> + };
> +
> + memory{
> + device_type = "memory";
> + reg = <0x0 0x80000000 0 0x60000000>,
> + <0x1 0x80000000 0 0x60000000>;
> + };
> +
> + chosen {
> + stdout-path = "serial1:115200n8";
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/sprd/whale2.dtsi b/arch/arm64/boot/dts/sprd/whale2.dtsi
> new file mode 100644
> index 0000000..7c217c5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sprd/whale2.dtsi
> @@ -0,0 +1,71 @@
> +/*
> + * Spreadtrum Whale2 platform peripherals
> + *
> + * Copyright (C) 2016, Spreadtrum Communications Inc.
> + *
> + * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> + */
> +
> +/ {
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + soc: soc {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + ap-apb {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x0 0x70000000 0x10000000>;
> +
> + uart0: serial at 0 {
> + compatible = "sprd,sc9860-uart",
> + "sprd,sc9836-uart";
> + reg = <0x0 0x100>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ext_26m>;
> + status = "disabled";
> + };
> +
> + uart1: serial at 100000 {
> + compatible = "sprd,sc9860-uart",
> + "sprd,sc9836-uart";
> + reg = <0x100000 0x100>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ext_26m>;
> + status = "disabled";
> + };
> +
> + uart2: serial at 200000 {
> + compatible = "sprd,sc9860-uart",
> + "sprd,sc9836-uart";
> + reg = <0x200000 0x100>;
> + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ext_26m>;
> + status = "disabled";
> + };
> +
> + uart3: serial at 300000 {
> + compatible = "sprd,sc9860-uart",
> + "sprd,sc9836-uart";
> + reg = <0x300000 0x100>;
> + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ext_26m>;
> + status = "disabled";
> + };
> + };
> +
> + };
> +
> + ext_26m: ext-26m {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + clock-output-names = "ext_26m";
> + };
> +};
> --
> 2.7.4
>
More information about the linux-arm-kernel
mailing list