usb: dwc2: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 146s
Doug Anderson
dianders at chromium.org
Tue Apr 18 16:41:30 EDT 2017
Stefan,
On Tue, Apr 18, 2017 at 1:25 PM, Stefan Wahren <stefan.wahren at i2se.com> wrote:
> Hi,
>
> [add Johan]
>
>> Stefan Wahren <stefan.wahren at i2se.com> hat am 18. April 2017 um 10:07 geschrieben:
>>
>>
>> Am 18.04.2017 um 00:37 schrieb Doug Anderson:
>> > Hi,
>> >
>> > On Mon, Apr 17, 2017 at 4:05 AM, Stefan Wahren <stefan.wahren at i2se.com> wrote:
>> >> Hi,
>> >>
>> >>> Stefan Wahren <stefan.wahren at i2se.com> hat am 31. Oktober 2016 um 21:34 geschrieben:
>> >>>
>> >>>
>> >>> I inspired by this issue [1] i build up a slightly modified setup with a
>> >>> Raspberry Pi B (mainline kernel 4.9rc3), a powered 7 port USB hub and 5 Prolific
>> >>> PL2303 USB to serial convertors. I modified the usb_test for dwc2 [2], which
>> >>> only tries to open all ttyUSB devices one after the other.
>> >>>
>> >>> Unfortunately the complete system stuck after opening the first ttyUSB device (
>> >>> heartbeat LED stop blinking, no reaction to debug UART). The only way to
>> >>> reanimate the system is to powerdown the USB hub with the USB to serial
>> >>> convertors.
>> >>>
>> >>> [1] - https://github.com/raspberrypi/linux/issues/1692
>> >>> [2] - https://gist.github.com/lategoodbye/dd0d30af27b6f101b03d5923b279dbaa
>> >> since this issue still exists with 4.11 (even without or with microframe scheduler enabled), i want to ask some additional questions:
>> >>
>> >> Is this issue reproducible with other dwc2 platforms than bcm2835?
>> > +Edmund Szeto, who I seem to remember emailing me about similar
>> > questions in the past.
>> >
>> >
>> >> Does the soft lockup also occurs after opening the second serial convertor or later?
>> > I don't have serial converters easily available to me, but back in the
>> > day when I was stressing things out on rk3288 I never saw anything
>> > this bad. ...of course, on rk3288 we've got 4 A17 cores running
>> > really fast, so possibly just being slower is what causes your
>> > problems here?
>>
>> The downstream kernel of the Raspberry Pi foundation with it's
>> out-of-tree dwc_otg driver is able to handle 8 serial converter on a RPI
>> B. I would be happy to get at least 2 or 3 working on mainline.
>>
>> >
>> > I will make the following observations:
>> >
>> > 1. With dwc2 you often end up in the situation where you need to
>> > service an interrupt every 125 uS. If servicing that interrupt takes
>> > anywhere near 125 uS in the common case then you'll be in trouble.
>>
>> I will try to measure this with a logic analyzer.
>>
>
> i took GPIO17 to measure _dwc2_hcd_irq and GPIO18 to measure _dwc2_hcd_urb_enqueue (patch against 4.11rc1 below).
>
> So i made my observations for 3 test cases:
>
> 1) no serial converter connected (idle)
> 2) 1 FTDI serial converter connected
> 3) 1 PL2303 serial converter connected
>
> case | ksoftirq cpu | mean duration | max duration | max duration | urb_enqueue |
> | | hcd_irq | hcd_irq | urb_enqueue | within 10 sec|
> -------+------------------+---------------+---------------+--------------+--------------+
> idle | 0.0% | 2 us | 16.5 us | 12 us | 5 |
> FTDI | 25.0% | 8.5 us | 18.0 us | 31000 us | ~ 400 |
> PL2303 | top doesn't work | 8.5 us | 22.5 us | 900000 us | 4 |
It's hard to know for sure that all of this time is really in
urb_enqueue(). Possible we could have task switched out and been
blocked elsewhere. Using ftrace to get more fine-grained timings
would be useful. ktime_get(), ktime_sub(), and ktime_to_us() are your
friends here if you want to use trace_printk.
> So it seems the serial USB driver has also an impact. In the analyzer trace the FTDI triggers many smaller urb_enqueue calls in the opposite to the PL2303 which only has few but huge calls.
>
> Additional notes:
> After closing the serial connection to the FTDI the system is usable as before. In case of PL2303 i need to disconnect the converter in order to get a usable system.
>
> Why do they behave so differently?
> Are these results of a overload?
> Doug, can you point me to your timing patch?
I did in the previous message, but basically take a look at:
https://chromium-review.googlesource.com/c/321980/4/drivers/usb/core/hcd.c#1668
I never posted this upstream since it was just a test patch.
>
> Thanks
> Stefan
>
> PS: My hacky patches for measuring
>
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index 1a7e830..aa490c3 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -930,6 +930,9 @@ struct dwc2_hsotg {
> struct dentry *debug_root;
> struct debugfs_regset32 *regset;
>
> + int gpio_17;
> + int gpio_18;
> +
> /* DWC OTG HW Release versions */
> #define DWC2_CORE_REV_2_71a 0x4f54271a
> #define DWC2_CORE_REV_2_90a 0x4f54290a
> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index a73722e..97271c8 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -45,6 +45,7 @@
> #include <linux/platform_device.h>
> #include <linux/dma-mapping.h>
> #include <linux/delay.h>
> +#include <linux/gpio.h>
> #include <linux/io.h>
> #include <linux/slab.h>
> #include <linux/usb.h>
> @@ -4595,13 +4596,17 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
> bool qh_allocated = false;
> struct dwc2_qtd *qtd;
>
> + gpio_set_value(hsotg->gpio_18, 1);
> +
> if (dbg_urb(urb)) {
> dev_vdbg(hsotg->dev, "DWC OTG HCD URB Enqueue\n");
> dwc2_dump_urb_info(hcd, urb, "urb_enqueue");
> }
>
> - if (!ep)
> + if (!ep) {
> + gpio_set_value(hsotg->gpio_18, 0);
> return -EINVAL;
> + }
>
> if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS ||
> usb_pipetype(urb->pipe) == PIPE_INTERRUPT) {
> @@ -4628,8 +4633,10 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
>
> dwc2_urb = dwc2_hcd_urb_alloc(hsotg, urb->number_of_packets,
> mem_flags);
> - if (!dwc2_urb)
> + if (!dwc2_urb) {
> + gpio_set_value(hsotg->gpio_18, 0);
> return -ENOMEM;
> + }
>
> dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe),
> usb_pipeendpoint(urb->pipe), ep_type,
> @@ -4705,6 +4712,8 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
>
> spin_unlock_irqrestore(&hsotg->lock, flags);
>
> + gpio_set_value(hsotg->gpio_18, 0);
> +
> return 0;
>
> fail3:
> @@ -4732,6 +4741,8 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
> fail0:
> kfree(dwc2_urb);
>
> + gpio_set_value(hsotg->gpio_18, 0);
> +
> return retval;
> }
>
> @@ -4825,8 +4836,15 @@ static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd,
> static irqreturn_t _dwc2_hcd_irq(struct usb_hcd *hcd)
> {
> struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
> + irqreturn_t ret;
>
> - return dwc2_handle_hcd_intr(hsotg);
> + gpio_set_value(hsotg->gpio_17, 1);
> +
> + ret = dwc2_handle_hcd_intr(hsotg);
> +
> + gpio_set_value(hsotg->gpio_17, 0);
> +
> + return ret;
> }
>
> /*
> diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
> index 9564bc7..e3f8a8a 100644
> --- a/drivers/usb/dwc2/platform.c
> +++ b/drivers/usb/dwc2/platform.c
> @@ -35,6 +35,7 @@
> */
>
> #include <linux/kernel.h>
> +#include <linux/gpio.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> #include <linux/clk.h>
> @@ -404,6 +405,16 @@ static int dwc2_driver_probe(struct platform_device *dev)
> return hsotg->irq;
> }
>
> + hsotg->gpio_17 = 475;
> + retval = devm_gpio_request_one(hsotg->dev, hsotg->gpio_17, GPIOF_OUT_INIT_LOW, "gpio_17");
> + if (retval)
> + pr_warn("Unable to request GPIO17: %d\n", retval);
> +
> + hsotg->gpio_18 = 476;
> + retval = devm_gpio_request_one(hsotg->dev, hsotg->gpio_18, GPIOF_OUT_INIT_LOW, "gpio_18");
> + if (retval)
> + pr_warn("Unable to request GPIO18: %d\n", retval);
> +
> dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
> hsotg->irq);
> retval = devm_request_irq(hsotg->dev, hsotg->irq,
More information about the linux-arm-kernel
mailing list