[PATCH 5/7] regulator: arizona-ldo1: Move pdata into a separate structure

Richard Fitzgerald rf at opensource.wolfsonmicro.com
Tue Apr 18 06:43:52 EDT 2017


In preparation for sharing this driver with Madera, move the pdata
for the LDO1 regulator out of struct arizona_pdata into a dedicated
pdata struct for this driver. As a result the code in
arizona_ldo1_of_get_pdata() can be made independent of struct arizona.

This patch also updates the definition of struct arizona_pdata and
the use of this pdata in mach-crag6410-module.c

Signed-off-by: Richard Fitzgerald <rf at opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410-module.c |  8 ++++--
 drivers/regulator/arizona-ldo1.c             | 39 +++++++++++++++-------------
 include/linux/mfd/arizona/pdata.h            |  4 +--
 include/linux/regulator/arizona-ldo1.h       | 24 +++++++++++++++++
 4 files changed, 53 insertions(+), 22 deletions(-)
 create mode 100644 include/linux/regulator/arizona-ldo1.h

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index ccc3ab8..ea5f216 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -209,7 +209,9 @@
 };
 
 static struct arizona_pdata wm5102_reva_pdata = {
-	.ldoena = S3C64XX_GPN(7),
+	.ldo1 = {
+		.ldoena = S3C64XX_GPN(7),
+	},
 	.gpio_base = CODEC_GPIO_BASE,
 	.irq_flags = IRQF_TRIGGER_HIGH,
 	.micd_pol_gpio = CODEC_GPIO_BASE + 4,
@@ -239,7 +241,9 @@
 };
 
 static struct arizona_pdata wm5102_pdata = {
-	.ldoena = S3C64XX_GPN(7),
+	.ldo1 = {
+		.ldoena = S3C64XX_GPN(7),
+	},
 	.gpio_base = CODEC_GPIO_BASE,
 	.irq_flags = IRQF_TRIGGER_HIGH,
 	.micd_pol_gpio = CODEC_GPIO_BASE + 2,
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index b726fa1..f5bc75a 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -25,6 +25,8 @@
 #include <linux/gpio.h>
 #include <linux/slab.h>
 
+#include <linux/regulator/arizona-ldo1.h>
+
 #include <linux/mfd/arizona/core.h>
 #include <linux/mfd/arizona/pdata.h>
 #include <linux/mfd/arizona/registers.h>
@@ -186,20 +188,19 @@ static int arizona_ldo1_hc_get_voltage_sel(struct regulator_dev *rdev)
 	.num_consumer_supplies = 1,
 };
 
-static int arizona_ldo1_of_get_pdata(struct device *dev,
-				     struct arizona *arizona,
+static int arizona_ldo1_of_get_pdata(struct arizona_ldo1_pdata *pdata,
 				     struct regulator_config *config,
-				     const struct regulator_desc *desc)
+				     const struct regulator_desc *desc,
+				     bool *external_dcvdd)
 {
-	struct arizona_pdata *pdata = &arizona->pdata;
 	struct arizona_ldo1 *ldo1 = config->driver_data;
-	struct device_node *np = arizona->dev->of_node;
+	struct device_node *np = config->dev->of_node;
 	struct device_node *init_node, *dcvdd_node;
 	struct regulator_init_data *init_data;
 
 	pdata->ldoena = of_get_named_gpio(np, "wlf,ldoena", 0);
 	if (pdata->ldoena < 0) {
-		dev_warn(arizona->dev,
+		dev_warn(config->dev,
 			 "LDOENA GPIO property missing/malformed: %d\n",
 			 pdata->ldoena);
 		pdata->ldoena = 0;
@@ -213,19 +214,19 @@ static int arizona_ldo1_of_get_pdata(struct device *dev,
 	if (init_node) {
 		config->of_node = init_node;
 
-		init_data = of_get_regulator_init_data(dev, init_node, desc);
-
+		init_data = of_get_regulator_init_data(config->dev, init_node,
+						       desc);
 		if (init_data) {
 			init_data->consumer_supplies = &ldo1->supply;
 			init_data->num_consumer_supplies = 1;
 
 			if (dcvdd_node && dcvdd_node != init_node)
-				arizona->external_dcvdd = true;
+				*external_dcvdd = true;
 
-			pdata->ldo1 = init_data;
+			pdata->init_data = init_data;
 		}
 	} else if (dcvdd_node) {
-		arizona->external_dcvdd = true;
+		*external_dcvdd = true;
 	}
 
 	of_node_put(dcvdd_node);
@@ -239,10 +240,9 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 	const struct regulator_desc *desc;
 	struct regulator_config config = { };
 	struct arizona_ldo1 *ldo1;
+	bool external_dcvdd = false;
 	int ret;
 
-	arizona->external_dcvdd = false;
-
 	ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
 	if (!ldo1)
 		return -ENOMEM;
@@ -283,17 +283,18 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 
 	if (IS_ENABLED(CONFIG_OF)) {
 		if (!dev_get_platdata(arizona->dev)) {
-			ret = arizona_ldo1_of_get_pdata(&pdev->dev, arizona,
-							&config, desc);
+			ret = arizona_ldo1_of_get_pdata(&arizona->pdata.ldo1,
+							&config, desc,
+							&external_dcvdd);
 			if (ret < 0)
 				return ret;
 		}
 	}
 
-	config.ena_gpio = arizona->pdata.ldoena;
+	config.ena_gpio = arizona->pdata.ldo1.ldoena;
 
-	if (arizona->pdata.ldo1)
-		config.init_data = arizona->pdata.ldo1;
+	if (arizona->pdata.ldo1.init_data)
+		config.init_data = arizona->pdata.ldo1.init_data;
 	else
 		config.init_data = &ldo1->init_data;
 
@@ -303,6 +304,8 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 	 */
 	if (config.init_data->num_consumer_supplies == 0)
 		arizona->external_dcvdd = true;
+	else
+		arizona->external_dcvdd = external_dcvdd;
 
 	ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config);
 
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index 43e875f..bfeecf1 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -12,6 +12,7 @@
 #define _ARIZONA_PDATA_H
 
 #include <dt-bindings/mfd/arizona.h>
+#include <linux/regulator/arizona-ldo1.h>
 #include <linux/regulator/arizona-micsupp.h>
 
 #define ARIZONA_GPN_DIR_MASK                     0x8000  /* GPN_DIR */
@@ -77,13 +78,12 @@ struct arizona_micd_range {
 
 struct arizona_pdata {
 	int reset;      /** GPIO controlling /RESET, if any */
-	int ldoena;     /** GPIO controlling LODENA, if any */
 
 	/** Regulator configuration for MICVDD */
 	struct arizona_micsupp_pdata micvdd;
 
 	/** Regulator configuration for LDO1 */
-	struct regulator_init_data *ldo1;
+	struct arizona_ldo1_pdata ldo1;
 
 	/** If a direct 32kHz clock is provided on an MCLK specify it here */
 	int clk32k_src;
diff --git a/include/linux/regulator/arizona-ldo1.h b/include/linux/regulator/arizona-ldo1.h
new file mode 100644
index 0000000..c685f12
--- /dev/null
+++ b/include/linux/regulator/arizona-ldo1.h
@@ -0,0 +1,24 @@
+/*
+ * Platform data for Arizona LDO1 regulator
+ *
+ * Copyright 2017 Cirrus Logic
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARIZONA_LDO1_H
+#define ARIZONA_LDO1_H
+
+struct regulator_init_data;
+
+struct arizona_ldo1_pdata {
+	/** GPIO controlling LDOENA, if any */
+	int ldoena;
+
+	/** Regulator configuration for LDO1 */
+	const struct regulator_init_data *init_data;
+};
+
+#endif
-- 
1.9.1




More information about the linux-arm-kernel mailing list