[PATCH 3/3] ARM: sun8i: a83t: Rename pinmux setting names

[Chen-Yu Tsai]

The pinmux setting nodes all have an address element in their node
names, however the pinctrl node does not have #address-cells.

Rename the existing pinmux setting nodes and labels in sun8i-a83t.dtsi,
dropping identifiers for functions that only have one possible setting,
and using the pingroup name if the function is identically available on
different pingroups.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
 arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts |  2 +-
 arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts       |  2 +-
 arch/arm/boot/dts/sun8i-a83t.dtsi                      | 10 +++++-----
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
index 342e1d33fa1c..aecdeeb368ed 100644
--- a/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-allwinner-h8homlet-v2.dts
@@ -59,6 +59,6 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_b>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
index 88b1e0970b8d..d2614f101ecc 100644
--- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
+++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts
@@ -60,6 +60,6 @@
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_b>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 82cb87f21b96..87b99338716b 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -174,7 +174,7 @@
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;
 
-			mmc0_pins_a: mmc0 at 0 {
+			mmc0_pins: mmc0_pins {
 				pins = "PF0", "PF1", "PF2",
 				       "PF3", "PF4", "PF5";
 				function = "mmc0";
@@ -182,13 +182,13 @@
 				bias-pull-up;
 			};
 
-			uart0_pins_a: uart0 at 0 {
-				pins = "PF2", "PF4";
+			uart0_pb_pins: uart0_pb_pins {
+				pins = "PB9", "PB10";
 				function = "uart0";
 			};
 
-			uart0_pins_b: uart0 at 1 {
-				pins = "PB9", "PB10";
+			uart0_pf_pins: uart0_pf_pins {
+				pins = "PF2", "PF4";
 				function = "uart0";
 			};
 		};
-- 
2.11.0