[PATCH v2 3/3] arm64: dts: exynos: Add support for s6e3hf2 panel device on TM2e board
Hoegeun Kwon
hoegeun.kwon at samsung.com
Tue Apr 18 03:44:40 EDT 2017
On 04/18/2017 03:00 PM, Andrzej Hajda wrote:
> On 17.04.2017 08:02, Hoegeun Kwon wrote:
>> This patch add the panel device tree node for s6e3hf2 display
>> controller to TM2e dts.
>>
>> Signed-off-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
> Maybe it would be good to remove te-gpios property - tm2/tm2e uses
> hardware trigger, so it is not necessary and generates useless interrupts.
Thanks for your review.
I agree, but I thinks remove the te-gpio property after your patch [1]
has been merged.
[1] https://patchwork.kernel.org/patch/9625383/
Best regards,
Hoegeun
>
> Beside this:
> Reviewed-by: Andrzej Hajda <a.hajda at samsung.com>
> --
> Regards
> Andrzej
>> ---
>> arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> index 694717a..98ad094 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
>> @@ -52,6 +52,18 @@
>> assigned-clock-rates = <278000000>, <400000000>;
>> };
>>
>> +&dsi {
>> + panel at 0 {
>> + compatible = "samsung,s6e3hf2";
>> + reg = <0>;
>> + vdd3-supply = <&ldo27_reg>;
>> + vci-supply = <&ldo28_reg>;
>> + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
>> + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
>> + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
>> + };
>> +};
>> +
>> &ldo31_reg {
>> regulator-name = "TSP_VDD_1.8V_AP";
>> regulator-min-microvolt = <1800000>;
>
>
>
More information about the linux-arm-kernel
mailing list