[PATCH v2 11/11] arm64: allwinner: a64: enable Wi-Fi for Pine64

[Maxime Ripard]

On Fri, Apr 14, 2017 at 06:56:16PM +0200, Andreas Färber wrote:
> > one provides I/O voltage).
> > 
> > Add device node for it.
> > 
> > Signed-off-by: Icenowy Zheng <icenowy at aosc.io>
> > ---
> >  arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> > index 7da074f95065..9d90bb32aa87 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts
> > @@ -64,6 +64,11 @@
> >  		regulator-min-microvolt = <3300000>;
> >  		regulator-max-microvolt = <3300000>;
> >  	};
> > +
> > +	wifi_pwrseq: wifi_pwrseq {
> > +		compatible = "mmc-pwrseq-simple";
> > +		reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
> > +	};
> >  };
> >  
> >  &ehci1 {
> > @@ -91,6 +96,17 @@
> >  	status = "okay";
> >  };
> >  
> > +&mmc1 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&mmc1_pins>;
> > +	vmmc-supply = <&reg_dldo4>;
> > +	vqmmc-supply = <&reg_eldo1>;
> > +	mmc-pwrseq = <&wifi_pwrseq>;
> > +	non-removable;
> > +	bus-width = <4>;
> > +	status = "okay";
> > +};
> 
> As you mention above, Wi-Fi is a module, so may be absent. Is it really
> correct to enable this node and hardcode a certain power sequence? In
> theory other modules could be attached.
> 
> To me that calls for an overlay instead.

Agreed.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 801 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20170417/ff7de77c/attachment.sig>