[PATCH v2] arm: imx6: zii: Add i210 PCIe interface to the device tree
Chris Healy
cphealy at gmail.com
Sun Apr 16 01:45:07 EDT 2017
The board has an Intel i210 Ethernet controller on its PCIe bus. Add a
device tree node for this.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
Signed-off-by: Chris Healy <cphealy at gmail.com>
---
This patch is against for-next of Shawn Guo's tree.
Since v1, this version fixes the spacing by using git send-email instead of gmail
to send the patch.
Thanks,
Chris Healy
---
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index 5d94b5e..8375c43 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -572,6 +572,18 @@
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
status = "okay";
+
+ host at 0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0 0 0 0 0>;
+ device_type = "pci";
+
+ i210: i210 at 0 {
+ reg = <0 0 0 0 0>;
+ device_type = "pci";
+ };
+ };
};
&usdhc2 {
--
2.7.4
More information about the linux-arm-kernel
mailing list