[PATCH] arm: imx6: zii: Add i210 PCIe interface to the device tree

Chris Healy cphealy at gmail.com
Sun Apr 16 00:02:50 EDT 2017


The board has an Intel i210 Ethernet controller on its PCIe bus. Add a
device tree node for this.

Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
 arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
index bcff7876..6f59d53 100644
--- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
@@ -572,6 +572,18 @@
  pinctrl-0 = <&pinctrl_pcie>;
  reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
  status = "okay";
+
+ host at 0 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0 0 0 0 0>;
+ device_type = "pci";
+
+ i210: i210 at 0 {
+ reg = <0 0 0 0 0>;
+ device_type = "pci";
+ };
+       };
 };

 &usdhc2 {



More information about the linux-arm-kernel mailing list