[PATCH v24 03/11] clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call
fu.wei at linaro.org
fu.wei at linaro.org
Fri Apr 14 14:40:06 EDT 2017
From: Fu Wei <fu.wei at linaro.org>
To cleanly split code paths specific to ACPI or DT at a higher level,
this patch removes arch_timer_init(), folding the relevant
parts of its logic into existing callers.
This paths the way for further rework, and saves a few lines.
Signed-off-by: Fu Wei <fu.wei at linaro.org>
Reviewed-by: Hanjun Guo <hanjun.guo at linaro.org>
[Mark: reword commit message]
Signed-off-by: Mark Rutland <mark.rutland at arm.com>
---
drivers/clocksource/arm_arch_timer.c | 46 ++++++++++++++++--------------------
1 file changed, 21 insertions(+), 25 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 03d71d6..e5e8708 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -1105,9 +1105,6 @@ static bool __init arch_timer_needs_of_probing(void)
static int __init arch_timer_common_init(void)
{
- if (acpi_disabled && arch_timer_needs_of_probing())
- return 0;
-
arch_timer_banner(arch_timers_present);
arch_counter_register(arch_timers_present);
return arch_timer_arch_init();
@@ -1145,26 +1142,9 @@ static enum arch_timer_ppi_nr __init arch_timer_select_ppi(void)
return ARCH_TIMER_PHYS_SECURE_PPI;
}
-static int __init arch_timer_init(void)
-{
- int ret;
-
- ret = arch_timer_register();
- if (ret)
- return ret;
-
- ret = arch_timer_common_init();
- if (ret)
- return ret;
-
- arch_timer_kvm_info.virtual_irq = arch_timer_ppi[ARCH_TIMER_VIRT_PPI];
-
- return 0;
-}
-
static int __init arch_timer_of_init(struct device_node *np)
{
- int i;
+ int i, ret;
u32 rate;
if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
@@ -1176,6 +1156,8 @@ static int __init arch_timer_of_init(struct device_node *np)
for (i = ARCH_TIMER_PHYS_SECURE_PPI; i < ARCH_TIMER_MAX_TIMER_PPI; i++)
arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
+ arch_timer_kvm_info.virtual_irq = arch_timer_ppi[ARCH_TIMER_VIRT_PPI];
+
rate = arch_timer_get_cntfrq();
arch_timer_of_configure_rate(rate, np);
@@ -1203,7 +1185,14 @@ static int __init arch_timer_of_init(struct device_node *np)
arch_counter_suspend_stop = of_property_read_bool(np,
"arm,no-tick-in-suspend");
- return arch_timer_init();
+ ret = arch_timer_register();
+ if (ret)
+ return ret;
+
+ if (arch_timer_needs_of_probing())
+ return 0;
+
+ return arch_timer_common_init();
}
CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init);
CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init);
@@ -1285,7 +1274,8 @@ static int __init arch_timer_mem_init(struct device_node *np)
if (ret)
goto out;
- return arch_timer_common_init();
+ if (!arch_timer_needs_of_probing())
+ ret = arch_timer_common_init();
out:
iounmap(cntctlbase);
of_node_put(best_frame);
@@ -1314,6 +1304,7 @@ static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags)
/* Initialize per-processor generic timer */
static int __init arch_timer_acpi_init(struct acpi_table_header *table)
{
+ int ret;
struct acpi_table_gtdt *gtdt;
if (arch_timers_present & ARCH_TIMER_TYPE_CP15) {
@@ -1341,6 +1332,8 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt,
gtdt->non_secure_el2_flags);
+ arch_timer_kvm_info.virtual_irq = arch_timer_ppi[ARCH_TIMER_VIRT_PPI];
+
/*
* When probing via ACPI, we have no mechanism to override the sysreg
* CNTFRQ value. This *must* be correct.
@@ -1363,8 +1356,11 @@ static int __init arch_timer_acpi_init(struct acpi_table_header *table)
/* Check for globally applicable workarounds */
arch_timer_check_ool_workaround(ate_match_acpi_oem_info, table);
- arch_timer_init();
- return 0;
+ ret = arch_timer_register();
+ if (ret)
+ return ret;
+
+ return arch_timer_common_init();
}
CLOCKSOURCE_ACPI_DECLARE(arch_timer, ACPI_SIG_GTDT, arch_timer_acpi_init);
#endif
--
2.9.3
More information about the linux-arm-kernel
mailing list