[PATCH v7 3/9] dt-bindings: display: Add STM32 LTDC driver

Yannick Fertre yannick.fertre at st.com
Fri Apr 14 06:13:33 EDT 2017


This patch adds documentation of device tree bindings for the STM32 LTDC
(Lcd-Tft Display Controller).

Acked-by: Rob Herring <robh at kernel.org>
Signed-off-by: Yannick Fertre <yannick.fertre at st.com>
---
 .../devicetree/bindings/display/st,stm32-ltdc.txt  | 36 ++++++++++++++++++++++
 1 file changed, 36 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/st,stm32-ltdc.txt

diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
new file mode 100644
index 0000000..8e14769
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -0,0 +1,36 @@
+* STMicroelectronics STM32 lcd-tft display controller
+
+- ltdc: lcd-tft display controller host
+  must be a sub-node of st-display-subsystem
+  Required properties:
+  - compatible: "st,stm32-ltdc"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - clocks: A list of phandle + clock-specifier pairs, one for each
+    entry in 'clock-names'.
+  - clock-names: A list of clock names. For ltdc it should contain:
+      - "lcd" for the clock feeding the output pixel clock & IP clock.
+  - resets: reset to be used by the device (defined by use of RCC macro).
+  Required nodes:
+    - Video port for RGB output.
+
+Example:
+
+/ {
+	...
+	soc {
+	...
+		ltdc: display-controller at 40016800 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x40016800 0x200>;
+			interrupts = <88>, <89>;
+			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
+			clocks = <&rcc 1 CLK_LCD>;
+			clock-names = "lcd";
+
+			port {
+				ltdc_out_rgb: endpoint {
+				};
+			};
+		};
+	};
+};
-- 
1.9.1




More information about the linux-arm-kernel mailing list