[PATCH 2/3] drm/panel: s6e3ha2: Add support for S6eHEA2 edge panel on TM2e board

[Andrzej Hajda]

Hi Hoegeun,

The patch looks OK, below small nitpicks.

On 14.04.2017 07:19, Hoegeun Kwon wrote:
> This patch considers edge type of panel on TM2e board and The panel
> has 1600x2560 resolution in 5.65" physical panel in the TM2e device.
>
> This identify panel type with compatibility string, also invoke
> display mode that matches the type. So add the check code for default
> compatibility and edge type and select the drm_display_mode of default
> and edge type.
>
> Signed-off-by: Hoegeun Kwon <hoegeun.kwon at samsung.com>
> ---
>  drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 62 ++++++++++++++++++++++++---
>  1 file changed, 56 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
> index 4cc08d7..b4a064a 100644
> --- a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
> +++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
> @@ -16,6 +16,7 @@
>  #include <drm/drm_panel.h>
>  #include <linux/backlight.h>
>  #include <linux/gpio/consumer.h>
> +#include <linux/of_device.h>
>  #include <linux/regulator/consumer.h>
>  
>  #define S6E3HA2_MIN_BRIGHTNESS		0
> @@ -218,6 +219,16 @@
>  	0x1d, 0x1e, 0x1f, 0x20, 0x21
>  };
>  
> +enum s6e3ha2_type {
> +	DEFAULT_TYPE,
> +	EDGE_TYPE,
> +};

I am not sure if default is the best name, it suggest some hierarchy
which is not true. Also edge does not fit here well, it is just buzzword
used for marketing.

Alternative enums:
- S6E3HA2_TYPE, S6E3HF2_TYPE, quite long, hard to catch difference, but
consistent with compatibles,
- HA2_TYPE, HF2_TYPE - shorter, more readable version,
- QHD_TYPE, WQXGA_TYPE - to empahsize resolutions.

> +
> +struct s6e3ha2_panel_desc {
> +	const struct drm_display_mode *mode;
> +	enum s6e3ha2_type type;
> +};
> +
>  struct s6e3ha2 {
>  	struct device *dev;
>  	struct drm_panel panel;
> @@ -226,6 +237,8 @@ struct s6e3ha2 {
>  	struct regulator_bulk_data supplies[2];
>  	struct gpio_desc *reset_gpio;
>  	struct gpio_desc *enable_gpio;
> +
> +	const struct s6e3ha2_panel_desc *desc;
>  };
>  
>  static int s6e3ha2_dcs_write(struct s6e3ha2 *ctx, const void *data, size_t len)
> @@ -283,11 +296,19 @@ static int s6e3ha2_single_dsi_set(struct s6e3ha2 *ctx)
>  static int s6e3ha2_freq_calibration(struct s6e3ha2 *ctx)
>  {
>  	s6e3ha2_dcs_write_seq_static(ctx, 0xfd, 0x1c);
> +	if (ctx->desc->type == EDGE_TYPE)
> +		s6e3ha2_dcs_write_seq_static(ctx, 0xf2, 0x67, 0x40, 0xc5);
>  	s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0x20, 0x39);
>  	s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0xa0);
>  	s6e3ha2_dcs_write_seq_static(ctx, 0xfe, 0x20);
> -	s6e3ha2_dcs_write_seq_static(ctx, 0xce, 0x03, 0x3b, 0x12, 0x62, 0x40,
> -				0x80, 0xc0, 0x28, 0x28, 0x28, 0x28, 0x39, 0xc5);
> +
> +	if (ctx->desc->type == DEFAULT_TYPE)
> +		s6e3ha2_dcs_write_seq_static(ctx, 0xce, 0x03, 0x3b, 0x12, 0x62,
> +			0x40, 0x80, 0xc0, 0x28, 0x28, 0x28, 0x28, 0x39, 0xc5);
> +	else
> +		s6e3ha2_dcs_write_seq_static(ctx, 0xce, 0x03, 0x3b, 0x14, 0x6d,
> +			0x40, 0x80, 0xc0, 0x28, 0x28, 0x28, 0x28, 0x39, 0xc5);
> +
>  	return 0;
>  }
>  
> @@ -597,16 +618,41 @@ static int s6e3ha2_enable(struct drm_panel *panel)
>  	.flags = 0,
>  };
>  
> +static const struct s6e3ha2_panel_desc samsung_s6e3ha2_tm2 = {

Please do not use tm2/tm2e here and later, they have nothing to do with
the panel.

> +	.mode = &default_mode,
> +	.type = DEFAULT_TYPE,
> +};
> +
> +static const struct drm_display_mode edge_mode = {
> +	.clock = 247856,
> +	.hdisplay = 1600,
> +	.hsync_start = 1600 + 1,
> +	.hsync_end = 1600 + 1 + 1,
> +	.htotal = 1600 + 1 + 1 + 1,
> +	.vdisplay = 2560,
> +	.vsync_start = 2560 + 1,
> +	.vsync_end = 2560 + 1 + 1,
> +	.vtotal = 2560 + 1 + 1 + 15,
> +	.vrefresh = 60,
> +	.flags = 0,
> +};
> +
> +static const struct s6e3ha2_panel_desc samsung_s6e3ha2_tm2e = {
> +	.mode = &edge_mode,
> +	.type = EDGE_TYPE,
> +};
> +
>  static int s6e3ha2_get_modes(struct drm_panel *panel)
>  {
>  	struct drm_connector *connector = panel->connector;
> +	struct s6e3ha2 *ctx = container_of(panel, struct s6e3ha2, panel);
>  	struct drm_display_mode *mode;
>  
> -	mode = drm_mode_duplicate(panel->drm, &default_mode);
> +	mode = drm_mode_duplicate(panel->drm, ctx->desc->mode);
>  	if (!mode) {
>  		DRM_ERROR("failed to add mode %ux%ux@%u\n",
> -				default_mode.hdisplay, default_mode.vdisplay,
> -				default_mode.vrefresh);
> +			ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
> +			ctx->desc->mode->vrefresh);
>  		return -ENOMEM;
>  	}
>  
> @@ -642,6 +688,7 @@ static int s6e3ha2_probe(struct mipi_dsi_device *dsi)
>  	mipi_dsi_set_drvdata(dsi, ctx);
>  
>  	ctx->dev = dev;
> +	ctx->desc = of_device_get_match_data(dev);
>  
>  	dsi->lanes = 4;
>  	dsi->format = MIPI_DSI_FMT_RGB888;
> @@ -717,7 +764,10 @@ static int s6e3ha2_remove(struct mipi_dsi_device *dsi)
>  }
>  
>  static const struct of_device_id s6e3ha2_of_match[] = {
> -	{ .compatible = "samsung,s6e3ha2" },
> +	{ .compatible = "samsung,s6e3ha2",
> +	  .data = &samsung_s6e3ha2_tm2 },
> +	{ .compatible = "samsung,s6e3ha2-e",
> +	  .data = &samsung_s6e3ha2_tm2e },

And please use compatible "samsung,s6e3hf2".

Regards
Andrzej


>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, s6e3ha2_of_match);