[PATCH 4/8] ARM: dts: imx7s: Add node for GPC
Shawn Guo
shawnguo at kernel.org
Thu Apr 13 23:40:06 EDT 2017
On Thu, Apr 13, 2017 at 06:32:38AM -0700, Andrey Smirnov wrote:
> Add node for GPC and specify as a parent interrupt controller for SoC bus.
>
> Cc: yurovsky at gmail.com
> Cc: Sascha Hauer <kernel at pengutronix.de>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Russell King <linux at armlinux.org.uk>
> Cc: devicetree at vger.kernel.org
> Cc: linux-kernel at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
> ---
> arch/arm/boot/dts/imx7s.dtsi | 27 ++++++++++++++++++++++++++-
> 1 file changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
> index 8fee299..1a7058f 100644
> --- a/arch/arm/boot/dts/imx7s.dtsi
> +++ b/arch/arm/boot/dts/imx7s.dtsi
> @@ -42,6 +42,7 @@
> */
>
> #include <dt-bindings/clock/imx7d-clock.h>
> +#include <dt-bindings/power/imx7-power.h>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -119,7 +120,7 @@
> #address-cells = <1>;
> #size-cells = <1>;
> compatible = "simple-bus";
> - interrupt-parent = <&intc>;
> + interrupt-parent = <&gpc>;
> ranges;
>
> funnel at 30041000 {
> @@ -301,6 +302,7 @@
> interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> #interrupt-cells = <3>;
> interrupt-controller;
> + interrupt-parent = <&intc>;
> reg = <0x31001000 0x1000>,
> <0x31002000 0x2000>,
> <0x31004000 0x2000>,
> @@ -309,6 +311,7 @@
>
> timer {
> compatible = "arm,armv7-timer";
> + interrupt-parent = <&intc>;
> interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
> @@ -564,6 +567,28 @@
> interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> #reset-cells = <1>;
> };
> +
> + gpc: gpc at 303a0000 {
> + compatible = "fsl,imx7d-gpc";
> + reg = <0x303a0000 0x10000>;
> + interrupt-controller;
> + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&intc>;
> + #power-domain-cells = <1>;
> +
> + pgc {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pgc_pcie_phy: pgc-pcie-phy-domain {
The node name should be something generic and has a unit-address when
there is a 'reg' property in the node.
> + #power-domain-cells = <0>;
> +
Drop this newline.
Shawn
> + reg = <IMX7_POWER_DOMAIN_PCIE_PHY>;
> + power-supply = <®_1p0d>;
> + };
> + };
> + };
> };
>
> aips2: aips-bus at 30400000 {
> --
> 2.9.3
>
More information about the linux-arm-kernel
mailing list