[PATCH v3] arm64: dts: rk3399: add support for firefly-rk3399 board

[Kever Yang]

Hi Heiko,


On 04/12/2017 09:29 PM, Heiko Stuebner wrote:
> Hi Kever,
>
> Am Montag, 10. April 2017, 11:50:13 CEST schrieb Kever Yang:
>> Firefly-rk3399 is a bord from T-Firefly, you can find detail about
>> it here:
>> http://en.t-firefly.com/en/firenow/Firefly_RK3399/
>>
>> This patch add basic node for the board and make it able to bring
>> up.
>>
>> Peripheral works:
>> - usb hub which connect to ehci controller;
>> - UART2 debug
>> - eMMC
>> - PCIe
>>
>> Not work:
>> - USB 3.0 HOST, type-C port
>> - sdio, sd-card
>>
>> Not test for other peripheral:
>> - HDMI
>> - Ethernet
>> - OPTICAL
>> - WiFi/BT
>> - MIPI CSI/DSI
>> - IR
>> - EDP/DP
>>
>> Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
> applied for 4.13, as we're a bit late for 4.12, with the following changes:

Thanks for your help, I'm not familiar with the devices status on upstream
because not working on kernel upstream for a long time.
> - commit subject
> - dropped status from backlight (as there is no disabled common node
>    and it's specific to the firefly itself)
> - quite some reordering of properties
> - reordered regulator nodes per their addresses: 0x1b < 0x40
> - dropped obsolete regulator-compatible properties
> - fixed gpio-irq on the mpu6500
> - dropped out-of-tree orientation properties of mpu6500
>    --> please provide the optional "mount-matrix" in a follow-up patch
>        see bindings/iio/imu/inv_mpu6050.txt

Maybe we can drop this mpu6050 node first? I can't find binding file for it.
> - dropped rockchip,i2s-broken-burst-len;
>    That change never made it into the mainline kernel
> - fixed pcie pinctrl indentation
> - dropped wireless-bluetooth uart-gpios pinctrl
> - dropped supports-emmc property
>
> Please try to be a bit more careful when porting stuff from device kernels
> with respect to properties not found in the mainline kernel and please
> also double-check in [0] that I didn't break anything.

I have test this patch on my firefly-rk3399, it works fine with pwm2 
regulator
init in U-Boot.

Thanks,
- Kever
>
>
> Thanks
> Heiko
>
> [0] https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/commit/?id=495a3c891a696b62465d71b1a125e3424352028b
>
>