[PATCH v3 21/32] powerpc: include default ioremap_nopost() implementation

[Lorenzo Pieralisi]

On Tue, Apr 11, 2017 at 11:38:48PM +1000, Benjamin Herrenschmidt wrote:
> On Tue, 2017-04-11 at 13:29 +0100, Lorenzo Pieralisi wrote:
> > The PCI specifications (Rev 3.0, 3.2.5 "Transaction Ordering and Posting")
> > mandate non-posted configuration transactions. As further highlighted in
> > the PCIe specifications (4.0 - Rev0.3, "Ordering Considerations for the
> > Enhanced Configuration Access Mechanism"), through ECAM and
> > ECAM-derivative configuration mechanism, the memory mapped transactions
> > from the host CPU into Configuration Requests on the PCI express fabric
> > may create ordering problems for software because writes to memory
> > address are typically posted transactions (unless the architecture can
> > enforce through virtual address mapping non-posted write transactions
> > behaviour) but writes to Configuration Space are not posted on the PCI
> > express fabric.
> > 
> > Include the asm-generic ioremap_nopost() implementation (currently
> > falling back to ioremap_nocache()) to provide a non-posted writes
> > ioremap interface to kernel subsystems.
> 
> NAK. As explained in my reply to patch 0.

Ok, point taken. BTW, may I ask you guys to have a look into this
please ?

https://lkml.org/lkml/2017/4/6/743

It is a side effect of this thread (v2), not sure why <asm/io.h>
on powerpc has to include <linux/io.h>.

Thanks,
Lorenzo

> > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi at arm.com>
> > > Cc: Michael Ellerman <mpe at ellerman.id.au>
> > > Cc: Bjorn Helgaas <bhelgaas at google.com>
> > > Cc: Benjamin Herrenschmidt <benh at kernel.crashing.org>
> > > Cc: Paul Mackerras <paulus at samba.org>
> > ---
> >  arch/powerpc/include/asm/io.h | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
> > index 5ed2924..6dcd0e2 100644
> > --- a/arch/powerpc/include/asm/io.h
> > +++ b/arch/powerpc/include/asm/io.h
> > @@ -757,6 +757,7 @@ extern void __iomem *ioremap_prot(phys_addr_t address, unsigned long size,
> >  extern void __iomem *ioremap_wc(phys_addr_t address, unsigned long size);
> > >  #define ioremap_nocache(addr, size)	ioremap((addr), (size))
> > >  #define ioremap_uc(addr, size)		ioremap((addr), (size))
> > +#include <asm-generic/ioremap-nopost.h>
> >  
> >  extern void iounmap(volatile void __iomem *addr);
> >