[PATCH] drivers: pwm: pwm-atmel: implement suspend/resume functions

[Boris Brezillon]

On Mon, 10 Apr 2017 18:01:37 +0200
Boris Brezillon <boris.brezillon at free-electrons.com> wrote:

> On Mon, 10 Apr 2017 17:10:11 +0200
> Thierry Reding <thierry.reding at gmail.com> wrote:
> 
> > On Mon, Apr 10, 2017 at 04:35:58PM +0200, Boris Brezillon wrote:  
> > > On Mon, 10 Apr 2017 17:20:20 +0300
> > > Claudiu Beznea <claudiu.beznea at microchip.com> wrote:
> > >     
> > > > Implement suspend and resume power management specific
> > > > function to allow PWM controller to correctly suspend
> > > > and resume.
> > > > 
> > > > Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
> > > > ---
> > > >  drivers/pwm/pwm-atmel.c | 81 +++++++++++++++++++++++++++++++++++++++++++++++++
> > > >  1 file changed, 81 insertions(+)
> > > > 
> > > > diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
> > > > index 530d7dc..75177c6 100644
> > > > --- a/drivers/pwm/pwm-atmel.c
> > > > +++ b/drivers/pwm/pwm-atmel.c
> > > > @@ -58,6 +58,8 @@
> > > >  #define PWM_MAX_PRD		0xFFFF
> > > >  #define PRD_MAX_PRES		10
> > > >  
> > > > +#define PWM_MAX_CH_NUM		(4)
> > > > +
> > > >  struct atmel_pwm_registers {
> > > >  	u8 period;
> > > >  	u8 period_upd;
> > > > @@ -65,11 +67,18 @@ struct atmel_pwm_registers {
> > > >  	u8 duty_upd;
> > > >  };
> > > >  
> > > > +struct atmel_pwm_pm_ctx {
> > > > +	u32 cmr;
> > > > +	u32 cdty;
> > > > +	u32 cprd;
> > > > +};
> > > > +
> > > >  struct atmel_pwm_chip {
> > > >  	struct pwm_chip chip;
> > > >  	struct clk *clk;
> > > >  	void __iomem *base;
> > > >  	const struct atmel_pwm_registers *regs;
> > > > +	struct atmel_pwm_pm_ctx ctx[PWM_MAX_CH_NUM];    
> > > 
> > > Hm, I'm pretty sure you can rely on the current PWM state and call
> > > atmel_pwm_apply() at resume time instead of doing that. See what I did
> > > here [1].
> > > 
> > > Thierry, maybe it's time to start thinking about a generic solution to
> > > save/restore PWM states.    
> > 
> > Generally speaking I think applying the states are the right way to go.
> > Ideally the PWM core could simply resume all of the PWM channels that a
> > device exports and the ->apply() callback would be enough to restore
> > that. I'm not sure if that's going to work with current implementations,
> > though. Your pwm-atmel-hlcdc patch certainly indicates that we're not
> > quite there yet.
> > 
> > On the other hand, I'm beginning to think that maybe PWMs are too low-
> > level for this kind of suspend/resume. For example if you use the PWM to
> > control a backlight brightness, restoring it via the driver core's
> > resume hook is potentially going to turn it back on at the wrong time. I
> > have a feeling that we might be better off just pushing this up to the
> > PWM users. A slight special case might be sysfs, for which no external
> > user driver exists. But we already have separate data structures to keep
> > track of sysfs-related context, so suspend/resume support could be added
> > there.  
> 
> Yep, you're probably right, we should let the PWM user take care of
> re-applying the PWM state, because it's the only one having enough
> knowledge about what the PWM is really driving to take a wise decision.

Note that we need drivers to implement both ->apply() and ->get_state()
for this approach to work correctly, and we also need some help from
the core to reset the PWM states at resume time, otherwise
pwm_apply_state() will just compare the old state to the new one, see
that they match and never call the ->apply() method.

Another solution would be to remove the memcmp here [1] and
unconditionally call ->apply().

[1]http://lxr.free-electrons.com/source/drivers/pwm/core.c#L466