[PATCH v7 00/13] mmc: Add support to Marvell Xenon SD Host Controller
Ulf Hansson
ulf.hansson at linaro.org
Mon Apr 10 11:14:29 EDT 2017
On 30 March 2017 at 17:22, Gregory CLEMENT
<gregory.clement at free-electrons.com> wrote:
> Hello,
>
> This the seventh version of the series adding support for the SDHCI
> Xenon controller. It can be currently found on the Armada 37xx and the
> Armada 7K/8K but will be also used in more Marvell SoC (and not only
> the mvebu ones actually).
>
> v6->v7:
> - Add comments on vqmmc and vmmc in examples in dt binding doc.
>
> - Fix all the issues pointed out by Ulf and Adrian:
>
> - Align the prefix of function and variable names.
> - Replace the if-else with switch statements when checking MMC_TIMING_*
> - Remove the spinlocks in set_ios.
> - Optimize the delay loop as Adrian patch does.
> - Add release of phy params structures
>
> - Add check of Vqmmc supply in Xenon signal voltage switch. If Vqmmc
> regulator doesn't exist, skip standard SD signal voltage regulator
> switch process.
>
> - Remove parse of child node mmc-card. Wait for a better solution.
>
> v5->v6:
>
> - Add a generic "mmc-card" parse in core layer.
>
> - Fix the spelling issues in Xenon dt binding doc and drivers.
>
> - Remove descriptions to common mmc properties from Xenon dt binding
> doc.
>
> - Split compatible string "marvell,armada-8k-sdhci" into
> "marvell,armada-ap806-sdhci" and "marvell,armada-cp110-sdhci".
>
> - Also updates the example in Xenon dt binding doc.
>
> - Remove unnecessary dependency on MMC_SDHCI from Xenon entry in
> Kconfig.
>
> - Move Xenon specific dt parse into a separate function.
>
> - Adjust warnings and condition check in Xenon PHY setting, to remove
> fragile hs200->hs400/hs400->hs200 sequence check function.
>
> - Enable PHY Slow Mode in MMC_TIMING_LEGACY timing if PHY Slow Mode is
> required in dts.
>
> - Add a patch allowing dts backwards compatible for the clock
>
> v4->v5:
>
> - Remove the patch to export sdhci_execute_tuning(). It is already
> exported in v4.10.
>
> - Introduce a patch adding a missing clock for the sdhci controller
> present on the CP master for A7K/A8K. There is no build dependency
> but obviously this patch is need to use the sdhci controller present
> on the CP part.
>
> - Adjust Xenon return setup, to avoid being overwritten by
> sdhci_add_host().
>
> - Change Xenon register definition prefix to "XENON_".
>
> - Fix typos in Xenon driver and dt-binding docs.
>
> - Change compatible string "marvell,armada-7000-sdhci" to
> "marvell,armada-8k-sdhci". Actually the Armada 7K SoCs are a subset
> of the Armada 8K SoCs. Moreover, the use of the '000' is not
> consistent with all the other compatible string already used for the
> Armada 7K/8K family.
>
> - Added the Tested-by from Russell King on an Armada 8K based board.
>
> v3 -> v4:
> For this version a few change have been done:
> - fixes 2 bug reported by kbuild-bot
> - remove extra of_node_put()
> - convert 0 in false for function returning boolean
>
> - add a device tree node for the sdhci controller present on the CP
> master for A7K/A8K. It also led to rename the sdhci0 node on AP to
> ap_sdhci0 to make a distinction with the one present on CP master.
>
> v2 -> v3
> I think that now most (if not all) the remarks had been taking into
> account since the second version. According to Ziji Hu, here are the
> following changes:
> " Changes in V3:
> Adjust and improve Xenon DT bindings. Move some caps setting from driver into
> DT. Use mmc-card sub-node to represent eMMC type.
> Remove PHY Sampling Fixed Delay Line scan in lower speed mode.
> Improve Xenon probe and ->init_card() functions.
> Export sdhci_enable_sdio_irq() and implement own SDIO IRQ control.
> Split PHY patch into two smaller patches.
> Temporarily remove AXI clock before its implementation is improved."
>
> Besides this changes I also
> - Removed the sdhci-xenon-phy.h and moved its content in the
> shc-xenon-phy.c file.
> - Fixed the tuning-count usage
> - Managed the error case for clk_prepare_enable
>
> For the record the change from v1 was:
> " Changes in V2:
> rebase on v4.9-rc2.
> Re-write Xenon bindings. Ajust Xenon DT property naming.
> Add a new DT property to indicate eMMC card type, instead of using
> variable card_candidate.
> Clear quirks SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 in Xenon platform data
> Add support to HS400 retuning."
>
> Thanks,
>
> Gregory
>
> Gregory CLEMENT (4):
> clk: apn806: Turn the eMMC clock as optional for dts backwards compatible
> arm64: dts: marvell: add eMMC support for Armada 37xx
> arm64: dts: marvell: add sdhci support for Armada 7K/8K
> arm64: configs: enable SDHCI driver for Xenon
>
> Hu Ziji (8):
> mmc: sdhci: Export sdhci_set_ios() from sdhci.c
> mmc: sdhci: Export sdhci_start_signal_voltage_switch() in sdhci.c
> mmc: sdhci: Export sdhci_enable_sdio_irq() from sdhci.c
> dt: bindings: Add bindings for Marvell Xenon SD Host Controller
> mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality
> mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC
> mmc: sdhci-xenon: Add SoC PHY PAD voltage control
> MAINTAINERS: add entry for Marvell Xenon MMC Host Controller drivers
>
> Konstantin Porotchkin (1):
> clk: apn806: Add eMMC clock to system controller driver
>
> Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt | 170 +-
> MAINTAINERS | 7 +-
> arch/arm64/boot/dts/marvell/armada-3720-db.dts | 9 +-
> arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 11 +-
> arch/arm64/boot/dts/marvell/armada-7040-db.dts | 14 +-
> arch/arm64/boot/dts/marvell/armada-8040-db.dts | 12 +-
> arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 14 +-
> arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 11 +-
> arch/arm64/configs/defconfig | 1 +-
> drivers/clk/mvebu/ap806-system-controller.c | 21 +-
> drivers/mmc/host/Kconfig | 8 +-
> drivers/mmc/host/Makefile | 3 +-
> drivers/mmc/host/sdhci-xenon-phy.c | 835 +++++++-
> drivers/mmc/host/sdhci-xenon.c | 548 +++++-
> drivers/mmc/host/sdhci-xenon.h | 101 +-
> drivers/mmc/host/sdhci.c | 11 +-
> drivers/mmc/host/sdhci.h | 4 +-
> 17 files changed, 1774 insertions(+), 6 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
> create mode 100644 drivers/mmc/host/sdhci-xenon-phy.c
> create mode 100644 drivers/mmc/host/sdhci-xenon.c
> create mode 100644 drivers/mmc/host/sdhci-xenon.h
>
> base-commit: a645cc1df4ff41ba54a2fb839962b8ff142121d9
> --
> git-series 0.9.1
Thanks, applied patch 1->10 for next! 11->13 will have to go via the
SoC maintainer tree.
Kind regards
Uffe
More information about the linux-arm-kernel
mailing list