[PATCH] ARM: dts: hi6220: Reset the mmc hosts
Wei Xu
xuwei5 at hisilicon.com
Sat Apr 8 02:38:23 EDT 2017
Hi Daniel,
On 2017/3/16 22:03, Daniel Lezcano wrote:
> The MMC hosts could be left in an unconsistent or uninitialized state from
> the firmware. Instead of assuming, the firmware did the right things, let's
> reset the host controllers.
>
> This change fixes a bug when the mmc2/sdio is initialized leading to a hung
> task:
>
> [ 242.704294] INFO: task kworker/7:1:675 blocked for more than 120 seconds.
> [ 242.711129] Not tainted 4.9.0-rc8-00017-gcf0251f #3
> [ 242.716571] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [ 242.724435] kworker/7:1 D 0 675 2 0x00000000
> [ 242.729973] Workqueue: events_freezable mmc_rescan
> [ 242.734796] Call trace:
> [ 242.737269] [<ffff00000808611c>] __switch_to+0xa8/0xb4
> [ 242.742437] [<ffff000008d07c04>] __schedule+0x1c0/0x67c
> [ 242.747689] [<ffff000008d08254>] schedule+0x40/0xa0
> [ 242.752594] [<ffff000008d0b284>] schedule_timeout+0x1c4/0x35c
> [ 242.758366] [<ffff000008d08e38>] wait_for_common+0xd0/0x15c
> [ 242.763964] [<ffff000008d09008>] wait_for_completion+0x28/0x34
> [ 242.769825] [<ffff000008a1a9f4>] mmc_wait_for_req_done+0x40/0x124
> [ 242.775949] [<ffff000008a1ab98>] mmc_wait_for_req+0xc0/0xf8
> [ 242.781549] [<ffff000008a1ac3c>] mmc_wait_for_cmd+0x6c/0x84
> [ 242.787149] [<ffff000008a26610>] mmc_io_rw_direct_host+0x9c/0x114
> [ 242.793270] [<ffff000008a26aa0>] sdio_reset+0x34/0x7c
> [ 242.798347] [<ffff000008a1d46c>] mmc_rescan+0x2fc/0x360
>
> [ ... ]
>
> Cc: stable at vger.kernel.org
> Signed-off-by: Daniel Lezcano <daniel.lezcano at linaro.org>
Thanks!
Applied to the hisilicon arm64 dt tree.
Best Regards,
Wei
> ---
> arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 470461d..1e5129b 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -774,6 +774,7 @@
> clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
> clock-names = "ciu", "biu";
> resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>;
> + reset-names = "reset";
> bus-width = <0x8>;
> vmmc-supply = <&ldo19>;
> pinctrl-names = "default";
> @@ -797,6 +798,7 @@
> clocks = <&sys_ctrl 4>, <&sys_ctrl 3>;
> clock-names = "ciu", "biu";
> resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>;
> + reset-names = "reset";
> vqmmc-supply = <&ldo7>;
> vmmc-supply = <&ldo10>;
> bus-width = <0x4>;
> @@ -815,6 +817,7 @@
> clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
> clock-names = "ciu", "biu";
> resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>;
> + reset-names = "reset";
> bus-width = <0x4>;
> broken-cd;
> pinctrl-names = "default", "idle";
More information about the linux-arm-kernel
mailing list