[PATCH v2 1/7] pinctrl: stm32: add possibility to use gpio-ranges to declare bank range
Alexandre TORGUE
alexandre.torgue at st.com
Fri Apr 7 08:42:58 EDT 2017
Use device tree entries to declare gpio range. It will allow to use
no contiguous gpio bank and holes inside a bank.
Signed-off-by: Alexandre TORGUE <alexandre.torgue at st.com>
diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c
index abc405b..d3c5f5d 100644
--- a/drivers/pinctrl/stm32/pinctrl-stm32.c
+++ b/drivers/pinctrl/stm32/pinctrl-stm32.c
@@ -71,6 +71,7 @@ struct stm32_gpio_bank {
struct pinctrl_gpio_range range;
struct fwnode_handle *fwnode;
struct irq_domain *domain;
+ u32 bank_nr;
};
struct stm32_pinctrl {
@@ -138,6 +139,17 @@ static inline void __stm32_gpio_set(struct stm32_gpio_bank *bank,
static int stm32_gpio_request(struct gpio_chip *chip, unsigned offset)
{
+ struct stm32_gpio_bank *bank = gpiochip_get_data(chip);
+ struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent);
+ struct pinctrl_gpio_range *range;
+ int pin = offset + (bank->bank_nr * STM32_GPIO_PINS_PER_BANK);
+
+ range = pinctrl_find_gpio_range_from_pin_nolock(pctl->pctl_dev, pin);
+ if (!range) {
+ dev_err(pctl->dev, "pin %d not in range.\n", pin);
+ return -EINVAL;
+ }
+
return pinctrl_request_gpio(chip->base + offset);
}
@@ -235,7 +247,7 @@ static void stm32_gpio_domain_activate(struct irq_domain *d,
struct stm32_gpio_bank *bank = d->host_data;
struct stm32_pinctrl *pctl = dev_get_drvdata(bank->gpio_chip.parent);
- regmap_field_write(pctl->irqmux[irq_data->hwirq], bank->range.id);
+ regmap_field_write(pctl->irqmux[irq_data->hwirq], bank->bank_nr);
gpiochip_lock_as_irq(&bank->gpio_chip, irq_data->hwirq);
}
@@ -589,7 +601,7 @@ static int stm32_pmx_set_mux(struct pinctrl_dev *pctldev,
}
range = pinctrl_find_gpio_range_from_pin(pctldev, g->pin);
- bank = gpio_range_to_bank(range);
+ bank = gpiochip_get_data(range->gc);
pin = stm32_gpio_pin(g->pin);
mode = stm32_gpio_get_mode(function);
@@ -604,7 +616,7 @@ static int stm32_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range, unsigned gpio,
bool input)
{
- struct stm32_gpio_bank *bank = gpio_range_to_bank(range);
+ struct stm32_gpio_bank *bank = gpiochip_get_data(range->gc);
int pin = stm32_gpio_pin(gpio);
stm32_pmx_set_mode(bank, pin, !input, 0);
@@ -762,7 +774,7 @@ static int stm32_pconf_parse_conf(struct pinctrl_dev *pctldev,
int offset, ret = 0;
range = pinctrl_find_gpio_range_from_pin(pctldev, pin);
- bank = gpio_range_to_bank(range);
+ bank = gpiochip_get_data(range->gc);
offset = stm32_gpio_pin(pin);
switch (param) {
@@ -843,7 +855,7 @@ static void stm32_pconf_dbg_show(struct pinctrl_dev *pctldev,
bool val;
range = pinctrl_find_gpio_range_from_pin_nolock(pctldev, pin);
- bank = gpio_range_to_bank(range);
+ bank = gpiochip_get_data(range->gc);
offset = stm32_gpio_pin(pin);
stm32_pmx_get_mode(bank, offset, &mode, &alt);
@@ -898,13 +910,14 @@ static void stm32_pconf_dbg_show(struct pinctrl_dev *pctldev,
static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl,
struct device_node *np)
{
- int bank_nr = pctl->nbanks;
- struct stm32_gpio_bank *bank = &pctl->banks[bank_nr];
+ struct stm32_gpio_bank *bank = &pctl->banks[pctl->nbanks];
struct pinctrl_gpio_range *range = &bank->range;
+ struct of_phandle_args args;
struct device *dev = pctl->dev;
struct resource res;
struct reset_control *rstc;
- int err, npins;
+ int npins = STM32_GPIO_PINS_PER_BANK;
+ int bank_nr, err;
rstc = of_reset_control_get(np, NULL);
if (!IS_ERR(rstc))
@@ -929,28 +942,33 @@ static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl,
return err;
}
- npins = pctl->match_data->npins;
- npins -= bank_nr * STM32_GPIO_PINS_PER_BANK;
- if (npins < 0)
- return -EINVAL;
- else if (npins > STM32_GPIO_PINS_PER_BANK)
- npins = STM32_GPIO_PINS_PER_BANK;
-
bank->gpio_chip = stm32_gpio_template;
+
+ of_property_read_string(np, "st,bank-name", &bank->gpio_chip.label);
+
+ if (!of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args)) {
+ bank_nr = args.args[1] / STM32_GPIO_PINS_PER_BANK;
+ bank->gpio_chip.base = args.args[1];
+ } else {
+ bank_nr = pctl->nbanks;
+ bank->gpio_chip.base = bank_nr * STM32_GPIO_PINS_PER_BANK;
+ range->name = bank->gpio_chip.label;
+ range->id = bank_nr;
+ range->pin_base = range->id * STM32_GPIO_PINS_PER_BANK;
+ range->base = range->id * STM32_GPIO_PINS_PER_BANK;
+ range->npins = npins;
+ range->gc = &bank->gpio_chip;
+ pinctrl_add_gpio_range(pctl->pctl_dev,
+ &pctl->banks[bank_nr].range);
+ }
bank->gpio_chip.base = bank_nr * STM32_GPIO_PINS_PER_BANK;
+
bank->gpio_chip.ngpio = npins;
bank->gpio_chip.of_node = np;
bank->gpio_chip.parent = dev;
+ bank->bank_nr = bank_nr;
spin_lock_init(&bank->lock);
- of_property_read_string(np, "st,bank-name", &range->name);
- bank->gpio_chip.label = range->name;
-
- range->id = bank_nr;
- range->pin_base = range->base = range->id * STM32_GPIO_PINS_PER_BANK;
- range->npins = bank->gpio_chip.ngpio;
- range->gc = &bank->gpio_chip;
-
/* create irq hierarchical domain */
bank->fwnode = of_node_to_fwnode(np);
@@ -967,7 +985,7 @@ static int stm32_gpiolib_register_bank(struct stm32_pinctrl *pctl,
return err;
}
- dev_info(dev, "%s bank added\n", range->name);
+ dev_info(dev, "%s bank added\n", bank->gpio_chip.label);
return 0;
}
@@ -1086,30 +1104,6 @@ int stm32_pctl_probe(struct platform_device *pdev)
return ret;
}
- for_each_child_of_node(np, child)
- if (of_property_read_bool(child, "gpio-controller"))
- banks++;
-
- if (!banks) {
- dev_err(dev, "at least one GPIO bank is required\n");
- return -EINVAL;
- }
-
- pctl->banks = devm_kcalloc(dev, banks, sizeof(*pctl->banks),
- GFP_KERNEL);
- if (!pctl->banks)
- return -ENOMEM;
-
- for_each_child_of_node(np, child) {
- if (of_property_read_bool(child, "gpio-controller")) {
- ret = stm32_gpiolib_register_bank(pctl, child);
- if (ret)
- return ret;
-
- pctl->nbanks++;
- }
- }
-
pins = devm_kcalloc(&pdev->dev, pctl->match_data->npins, sizeof(*pins),
GFP_KERNEL);
if (!pins)
@@ -1129,13 +1123,34 @@ int stm32_pctl_probe(struct platform_device *pdev)
pctl->pctl_dev = devm_pinctrl_register(&pdev->dev, &pctl->pctl_desc,
pctl);
+
if (IS_ERR(pctl->pctl_dev)) {
dev_err(&pdev->dev, "Failed pinctrl registration\n");
return PTR_ERR(pctl->pctl_dev);
}
- for (i = 0; i < pctl->nbanks; i++)
- pinctrl_add_gpio_range(pctl->pctl_dev, &pctl->banks[i].range);
+ for_each_child_of_node(np, child)
+ if (of_property_read_bool(child, "gpio-controller"))
+ banks++;
+
+ if (!banks) {
+ dev_err(dev, "at least one GPIO bank is required\n");
+ return -EINVAL;
+ }
+ pctl->banks = devm_kcalloc(dev, banks, sizeof(*pctl->banks),
+ GFP_KERNEL);
+ if (!pctl->banks)
+ return -ENOMEM;
+
+ for_each_child_of_node(np, child) {
+ if (of_property_read_bool(child, "gpio-controller")) {
+ ret = stm32_gpiolib_register_bank(pctl, child);
+ if (ret)
+ return ret;
+
+ pctl->nbanks++;
+ }
+ }
dev_info(dev, "Pinctrl STM32 initialized\n");
--
1.9.1
More information about the linux-arm-kernel
mailing list