[PATCH v9 07/12] ARM: EXYNOS: introduce soc specific pm ops

Krzysztof Kozlowski krzk at kernel.org
Fri Apr 7 05:24:18 EDT 2017


On Thu, Mar 30, 2017 at 3:17 PM, Pankaj Dubey <pankaj.dubey at samsung.com> wrote:
> For s2r various Exynos SoC needs different programming sequence and data.

This is not S2R so:
"Sleep modes on various Exynos SoCs need..."

> Currently this is handled by adding lots of soc_is_exynosMMM checks in the
> code, in an attempt to remove the dependency of such helper functions
"code." full stop.

> specific to each SoC, let's separate these programming sequence by
> introducing a new struct exynos_s2r_data. This struct will contain

If you plan to extend it to all sleep modes, then:
"exynos_sleep_data"? But if not, then just "exynos_aftr_data" or
"exynos_cpuidle_data" as this is real use for now.

> different function hooks and data for differentiating these programming
> sequences based on SoC's soc_id and revision parameters which can be
> matched by using generic API "soc_device_match".
>
> Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
> ---
>  arch/arm/mach-exynos/pm.c | 122 +++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 116 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
> index 4a73b02..fa24098 100644
> --- a/arch/arm/mach-exynos/pm.c
> +++ b/arch/arm/mach-exynos/pm.c
> @@ -20,6 +20,7 @@
>  #include <linux/of.h>
>  #include <linux/soc/samsung/exynos-regs-pmu.h>
>  #include <linux/soc/samsung/exynos-pmu.h>
> +#include <linux/sys_soc.h>
>
>  #include <asm/firmware.h>
>  #include <asm/smp_scu.h>
> @@ -30,6 +31,12 @@
>
>  #include "common.h"
>
> +struct exynos_s2r_data {

Rename all "s2r" occurrences to appropriate name.

> +       void (*enter_aftr)(void);
> +};
> +
> +static const struct exynos_s2r_data *s2r_data;
> +
>  static inline void __iomem *exynos_boot_vector_addr(void)
>  {
>         if (samsung_rev() == EXYNOS4210_REV_1_1)
> @@ -160,13 +167,26 @@ static int exynos_aftr_finisher(unsigned long flags)
>
>  void exynos_enter_aftr(void)
>  {
> +       if (s2r_data && s2r_data->enter_aftr)
> +               s2r_data->enter_aftr();
> +}
> +
> +static void exynos3_enter_aftr(void)
> +{
>         unsigned int cpuid = smp_processor_id();
>
>         cpu_pm_enter();
> +       exynos_set_boot_flag(cpuid, C2_STATE);
> +       exynos_pm_central_suspend();
> +       cpu_suspend(0, exynos_aftr_finisher);
> +       exynos_pm_central_resume();
> +       exynos_clear_boot_flag(cpuid, C2_STATE);
> +       cpu_pm_exit();
> +}
>
> -       if (of_machine_is_compatible("samsung,exynos3250"))
> -               exynos_set_boot_flag(cpuid, C2_STATE);
> -
> +static void exynos4_enter_aftr(void)
> +{
> +       cpu_pm_enter();
>         exynos_pm_central_suspend();
>
>         if (of_machine_is_compatible("samsung,exynos4212") ||
> @@ -185,13 +205,103 @@ void exynos_enter_aftr(void)
>         }
>
>         exynos_pm_central_resume();
> +       cpu_pm_exit();
> +}
>
> -       if (of_machine_is_compatible("samsung,exynos3250"))
> -               exynos_clear_boot_flag(cpuid, C2_STATE);
> -
> +static void exynos5_enter_aftr(void)
> +{
> +       cpu_pm_enter();
> +       exynos_pm_central_suspend();
> +       cpu_suspend(0, exynos_aftr_finisher);
> +       exynos_pm_central_resume();
>         cpu_pm_exit();
>  }
>
> +static const struct exynos_s2r_data exynos_common_s2r_data = {
> +       .enter_aftr             = exynos5_enter_aftr,
> +};
> +
> +static const struct exynos_s2r_data exynos3250_s2r_data = {
> +       .enter_aftr             = exynos3_enter_aftr,
> +};
> +
> +static const struct exynos_s2r_data exynos4210_rev11_s2r_data = {
> +       .enter_aftr             = exynos4_enter_aftr,
> +};
> +
> +static const struct exynos_s2r_data exynos4210_rev10_s2r_data = {
> +       .enter_aftr             = exynos4_enter_aftr,
> +};
> +
> +static const struct exynos_s2r_data exynos4x12_s2r_data = {
> +       .enter_aftr             = exynos4_enter_aftr,
> +};
> +
> +static const struct soc_device_attribute exynos_soc_revision[] __initconst = {
> +       {
> +               .soc_id = "EXYNOS3250",
> +               .data = &exynos3250_s2r_data
> +       },
> +       {
> +               .soc_id = "EXYNOS4210",
> +               .revision = "11",
> +               .data = &exynos4210_rev11_s2r_data
> +       },
> +       {
> +               .soc_id = "EXYNOS4210",
> +               .revision = "10",
> +               .data = &exynos4210_rev10_s2r_data
> +       },
> +       {
> +               .soc_id = "EXYNOS4212",
> +               .data = &exynos4x12_s2r_data
> +       },
> +       {
> +               .soc_id = "EXYNOS4412",
> +               .data = &exynos4x12_s2r_data
> +       },
> +       {
> +               .soc_id = "EXYNOS5250",
> +               .data = &exynos_common_s2r_data
> +       },
> +       {
> +               .soc_id = "EXYNOS5260",
> +               .data = &exynos_common_s2r_data
> +       },
> +       {
> +               .soc_id = "EXYNOS5440",
> +               .data = &exynos_common_s2r_data
> +       },
> +       {
> +               .soc_id = "EXYNOS5410",
> +               .data = &exynos_common_s2r_data
> +       },
> +       {
> +               .soc_id = "EXYNOS5420",
> +               .data = &exynos_common_s2r_data
> +       },
> +       {
> +               .soc_id = "EXYNOS5800",
> +               .data = &exynos_common_s2r_data
> +       },
> +};
> +
> +int __init exynos_s2r_init(void)
> +{
> +       const struct soc_device_attribute *match;
> +
> +       match = soc_device_match(exynos_soc_revision);
> +
> +       if (match)
> +               s2r_data = (const struct exynos_s2r_data *) match->data;
> +
> +       if (!s2r_data)
> +               return -ENODEV;
> +
> +       return 0;
> +}
> +arch_initcall(exynos_s2r_init);
> +

I guess you already found possible probe-order issue. You should
register all of this after having the soc chipid driver. However it is
required by cpuidle driver which is being registered in machine_init()
call....  You cannot use deferred probe here, so maybe the only way is
to manually order the calls in machine_init():
1. exynos_chipid_early_init()
2. this one.
3. cpuidle driver register.

Best regards,
Krzysztof



More information about the linux-arm-kernel mailing list