[PATCH 3/3] perf tool, arm64, thunderx2: Add implementation defined events for ThunderX2

[Mark Rutland]

On Wed, Apr 05, 2017 at 02:42:39PM +0530, Ganapatrao Kulkarni wrote:
> On Tue, Apr 4, 2017 at 5:58 PM, Mark Rutland <mark.rutland at arm.com> wrote:
> > On Tue, Apr 04, 2017 at 01:06:43PM +0530, Ganapatrao Kulkarni wrote:
> >> This is not a full event list, but a short list of useful events.
> >>
> >> Signed-off-by: Ganapatrao Kulkarni <ganapatrao.kulkarni at cavium.com>
> >> ---
> >>  tools/perf/pmu-events/arch/arm64/mapfile.csv       |  2 +
> >>  .../arm64/thunderx2/implementation-defined.json    | 72 ++++++++++++++++++++++
> >>  2 files changed, 74 insertions(+)
> >>  create mode 100644 tools/perf/pmu-events/arch/arm64/mapfile.csv
> >>  create mode 100644 tools/perf/pmu-events/arch/arm64/thunderx2/implementation-defined.json
> >>
> >> diff --git a/tools/perf/pmu-events/arch/arm64/mapfile.csv b/tools/perf/pmu-events/arch/arm64/mapfile.csv
> >> new file mode 100644
> >> index 0000000..ba30e43
> >> --- /dev/null
> >> +++ b/tools/perf/pmu-events/arch/arm64/mapfile.csv
> >> @@ -0,0 +1,2 @@
> >> +Family-model,Version,Filename,EventType
> >> +0x00000000420f5161,v1,thunderx2,core
> >> diff --git a/tools/perf/pmu-events/arch/arm64/thunderx2/implementation-defined.json b/tools/perf/pmu-events/arch/arm64/thunderx2/implementation-defined.json
> >> new file mode 100644
> >> index 0000000..360e084
> >> --- /dev/null
> >> +++ b/tools/perf/pmu-events/arch/arm64/thunderx2/implementation-defined.json
> >> @@ -0,0 +1,72 @@
> >> +[
> >> +    {
> >> +        "PublicDescription": "Attributable Level 1 data cache access, read",
> >> +        "EventCode": "0x40",
> >> +        "EventName": "l1d_cache_access_read",
> >> +        "BriefDescription": "l1d cache access, read",
> >> +     "CPU" :"armv8_pmuv3_0"
> >
> > Please let's not hard-code the name like this. Surely we can get rid of this?
> >
> > The kernel doesn't currently name PMUs as armv8_pmuv3_*, and as that can
> > differ across DT/ACPI and in big.LITTLE, I don't think it makes sense to
> > try to rely one particular string regardless.
> 
> This string/name is fixed for a platform. having name here is essential to
> know which devices among pmu (armv8_pmuv3_0, breakpoint, software)
> devices, these jevents to be added.
> also this json file is specific to a arch/soc/board, it is not a
> generic file to be common.

This file describe the events of a CPU PMU, and CPUs are not specific to
a platform in general. There are many systems using Cortex-A57, for
example.

Across big.LITTLE SoCs with Cortex-A57, there's no guarantee as to
whether the Cortex-A57 cores would be named armv8_pmuv3_0, or
armv8_pmuv3_1, etc. This would depend on the boot CPU, probe order of
secondaries, etc.

I appreciate that your platform is homnogeneous, and you may not expect
the core to be reused in any heterogeneous system. However, I think that
if we're going to make this work for arm64 we should handle the general
case, rather than only having it support a limited set of platforms.

Currently, we don't have an "official" way of identifying which PMUs are
CPU PMUs, but one way we could idtentify them would be to look at if
they have a "cpus" attribute under sysfs (rather than a "cpumask"
attribute).

Thanks,
Mark.