[PATCH v2 4/4] ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
Leonard Crestez
leonard.crestez at nxp.com
Tue Apr 4 10:04:14 PDT 2017
On imx6qp-sabresd LDO_ARM is connected to a different PMIC output than
the other imx6qdl-sabresd boards.
Setting cpu0 arm-supply to sw2_reg is wrong, this must have mistakenly
slipped out of the vendor tree where this is are used for LDO bypass.
Signed-off-by: Leonard Crestez <leonard.crestez at nxp.com>
Reviewed-by: Lucas Stach <l.stach at pengutronix.de>
---
arch/arm/boot/dts/imx6qp-sabresd.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qp-sabresd.dts b/arch/arm/boot/dts/imx6qp-sabresd.dts
index b234580..a8a5004 100644
--- a/arch/arm/boot/dts/imx6qp-sabresd.dts
+++ b/arch/arm/boot/dts/imx6qp-sabresd.dts
@@ -50,8 +50,8 @@
compatible = "fsl,imx6qp-sabresd", "fsl,imx6qp";
};
-&cpu0 {
- arm-supply = <&sw2_reg>;
+®_arm {
+ vin-supply = <&sw2_reg>;
};
&iomuxc {
--
2.7.4
More information about the linux-arm-kernel
mailing list