[PATCH v4 4/5] ARM: sunxi: h3/h5: switch apb0-related clocks to r_ccu
Icenowy Zheng
icenowy at aosc.io
Tue Apr 4 02:50:59 PDT 2017
From: Icenowy Zheng <icenowy at aosc.xyz>
Now we have driver for the PRCM CCU, switch to use it instead of
old-style clock nodes for apb0-related clocks in sunxi-h3-h5.dtsi .
The mux 3 of R_CCU is still the internal oscillator, which is said to be
16MHz plus minus 30%, and get a measured value of 15MHz~16MHz on my two
H3 boards and one H5 board.
Signed-off-by: Icenowy Zheng <icenowy at aosc.xyz>
---
Changes in v4:
- Temporarily dropped the CCU headers.
Changes in v3:
- Change osc32000 to iosc.
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 45 ++++++++++++--------------------------
1 file changed, 14 insertions(+), 31 deletions(-)
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 6640ebfa6419..1aeeacb3a884 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -68,31 +68,12 @@
clock-output-names = "osc32k";
};
- apb0: apb0_clk {
- compatible = "fixed-factor-clock";
+ iosc: internal-osc-clk {
#clock-cells = <0>;
- clock-div = <1>;
- clock-mult = <1>;
- clocks = <&osc24M>;
- clock-output-names = "apb0";
- };
-
- apb0_gates: clk at 01f01428 {
- compatible = "allwinner,sun8i-h3-apb0-gates-clk",
- "allwinner,sun4i-a10-gates-clk";
- reg = <0x01f01428 0x4>;
- #clock-cells = <1>;
- clocks = <&apb0>;
- clock-indices = <0>, <1>;
- clock-output-names = "apb0_pio", "apb0_ir";
- };
-
- ir_clk: ir_clk at 01f01454 {
- compatible = "allwinner,sun4i-a10-mod0-clk";
- reg = <0x01f01454 0x4>;
- #clock-cells = <0>;
- clocks = <&osc32k>, <&osc24M>;
- clock-output-names = "ir";
+ compatible = "fixed-clock";
+ clock-frequency = <16000000>;
+ clock-accuracy = <300000000>;
+ clock-output-names = "iosc";
};
};
@@ -576,9 +557,12 @@
<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
- apb0_reset: reset at 01f014b0 {
- reg = <0x01f014b0 0x4>;
- compatible = "allwinner,sun6i-a31-clock-reset";
+ r_ccu: clock at 1f01400 {
+ compatible = "allwinner,sun50i-a64-r-ccu";
+ reg = <0x01f01400 0x100>;
+ clocks = <&osc24M>, <&osc32k>, <&iosc>;
+ clock-names = "hosc", "losc", "iosc";
+ #clock-cells = <1>;
#reset-cells = <1>;
};
@@ -589,9 +573,9 @@
ir: ir at 01f02000 {
compatible = "allwinner,sun5i-a13-ir";
- clocks = <&apb0_gates 1>, <&ir_clk>;
+ clocks = <&r_ccu 4>, <&r_ccu 11>;
clock-names = "apb", "ir";
- resets = <&apb0_reset 1>;
+ resets = <&r_ccu 0>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01f02000 0x40>;
status = "disabled";
@@ -601,9 +585,8 @@
compatible = "allwinner,sun8i-h3-r-pinctrl";
reg = <0x01f02c00 0x400>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>;
+ clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>;
clock-names = "apb", "hosc", "losc";
- resets = <&apb0_reset 0>;
gpio-controller;
#gpio-cells = <3>;
interrupt-controller;
--
2.12.2
More information about the linux-arm-kernel
mailing list