[PATCH v2 03/13] drm/meson: Add support for components
Daniel Vetter
daniel at ffwll.ch
Tue Apr 4 01:59:31 PDT 2017
On Tue, Mar 21, 2017 at 04:25:40PM +0100, Neil Armstrong wrote:
> This patch adds support for optional components connected through the
> Device Tree endpoints scheme.
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
> drivers/gpu/drm/meson/meson_drv.c | 113 +++++++++++++++++++++++++++++++++-----
> 1 file changed, 99 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/meson/meson_drv.c b/drivers/gpu/drm/meson/meson_drv.c
> index bc562a0..a2e9f56 100644
> --- a/drivers/gpu/drm/meson/meson_drv.c
> +++ b/drivers/gpu/drm/meson/meson_drv.c
> @@ -24,6 +24,7 @@
> #include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/platform_device.h>
> +#include <linux/component.h>
> #include <linux/of_graph.h>
>
> #include <drm/drmP.h>
> @@ -150,9 +151,9 @@ static bool meson_vpu_has_available_connectors(struct device *dev)
> .max_register = 0x1000,
> };
>
> -static int meson_drv_probe(struct platform_device *pdev)
> +static int meson_drv_bind(struct device *dev)
> {
> - struct device *dev = &pdev->dev;
> + struct platform_device *pdev = to_platform_device(dev);
> struct meson_drm *priv;
> struct drm_device *drm;
> struct resource *res;
> @@ -215,6 +216,15 @@ static int meson_drv_probe(struct platform_device *pdev)
>
> drm_vblank_init(drm, 1);
> drm_mode_config_init(drm);
> + drm->mode_config.max_width = 3840;
> + drm->mode_config.max_height = 2160;
> + drm->mode_config.funcs = &meson_mode_config_funcs;
> +
> + /* Hardware Initialization */
> +
> + meson_venc_init(priv);
> + meson_vpp_init(priv);
> + meson_viu_init(priv);
>
> /* Encoder Initialization */
>
> @@ -222,11 +232,11 @@ static int meson_drv_probe(struct platform_device *pdev)
> if (ret)
> goto free_drm;
>
> - /* Hardware Initialization */
> -
> - meson_venc_init(priv);
> - meson_vpp_init(priv);
> - meson_viu_init(priv);
> + ret = component_bind_all(drm->dev, drm);
> + if (ret) {
> + dev_err(drm->dev, "Couldn't bind all components\n");
> + goto free_drm;
> + }
>
> ret = meson_plane_create(priv);
> if (ret)
> @@ -241,9 +251,6 @@ static int meson_drv_probe(struct platform_device *pdev)
> goto free_drm;
>
> drm_mode_config_reset(drm);
> - drm->mode_config.max_width = 8192;
> - drm->mode_config.max_height = 8192;
> - drm->mode_config.funcs = &meson_mode_config_funcs;
>
> priv->fbdev = drm_fbdev_cma_init(drm, 32,
> drm->mode_config.num_connector);
> @@ -268,9 +275,9 @@ static int meson_drv_probe(struct platform_device *pdev)
> return ret;
> }
>
> -static int meson_drv_remove(struct platform_device *pdev)
> +static void meson_drv_unbind(struct device *dev)
> {
> - struct drm_device *drm = dev_get_drvdata(&pdev->dev);
> + struct drm_device *drm = dev_get_drvdata(dev);
> struct meson_drm *priv = drm->dev_private;
>
> drm_dev_unregister(drm);
> @@ -280,9 +287,88 @@ static int meson_drv_remove(struct platform_device *pdev)
> drm_vblank_cleanup(drm);
> drm_dev_unref(drm);
>
> - return 0;
> }
>
> +static const struct component_master_ops meson_drv_master_ops = {
> + .bind = meson_drv_bind,
> + .unbind = meson_drv_unbind,
> +};
> +
> +static int compare_of(struct device *dev, void *data)
> +{
> + DRM_DEBUG_DRIVER("Comparing of node %s with %s\n",
> + of_node_full_name(dev->of_node),
> + of_node_full_name(data));
> +
> + return dev->of_node == data;
> +}
> +
> +/* Possible connectors nodes to ignore */
> +static const struct of_device_id connectors_match[] = {
> + { .compatible = "composite-video-connector" },
> + { .compatible = "svideo-connector" },
> + { .compatible = "hdmi-connector" },
> + { .compatible = "dvi-connector" },
> + {}
> +};
> +
> +static int meson_probe_remote(struct platform_device *pdev,
> + struct component_match **match,
> + struct device_node *parent,
> + struct device_node *remote)
> +{
> + struct device_node *ep, *remote_node;
> + int count = 1;
> +
> + /* If node is a connector, return and do not add to match table */
> + if (of_match_node(connectors_match, remote))
> + return 1;
> +
> + component_match_add(&pdev->dev, match, compare_of, remote);
> +
> + for_each_endpoint_of_node(remote, ep) {
> + remote_node = of_graph_get_remote_port_parent(ep);
> + if (!remote_node ||
> + remote_node == parent || /* Ignore parent endpoint */
> + !of_device_is_available(remote_node))
> + continue;
> +
> + count += meson_probe_remote(pdev, match, remote, remote_node);
> +
> + of_node_put(remote_node);
> + }
> +
> + return count;
> +}
> +
> +static int meson_drv_probe(struct platform_device *pdev)
> +{
> + struct component_match *match = NULL;
> + struct device_node *np = pdev->dev.of_node;
> + struct device_node *ep, *remote;
> + int count = 0;
> +
> + for_each_endpoint_of_node(np, ep) {
> + remote = of_graph_get_remote_port_parent(ep);
> + if (!remote || !of_device_is_available(remote))
> + continue;
> +
> + count += meson_probe_remote(pdev, &match, np, remote);
> + }
> +
> + /* If some endpoints were found, initialize the nodes */
> + if (count) {
What if you have more than 1 endpoint described, but module load order
conspires against you to only initialize 1 at first?
-Daniel
> + dev_info(&pdev->dev, "Queued %d outputs on vpu\n", count);
> +
> + return component_master_add_with_match(&pdev->dev,
> + &meson_drv_master_ops,
> + match);
> + }
> +
> + /* If no output endpoints were available, simply bail out */
> + return 0;
> +};
> +
> static const struct of_device_id dt_match[] = {
> { .compatible = "amlogic,meson-gxbb-vpu" },
> { .compatible = "amlogic,meson-gxl-vpu" },
> @@ -293,7 +379,6 @@ static int meson_drv_remove(struct platform_device *pdev)
>
> static struct platform_driver meson_drm_platform_driver = {
> .probe = meson_drv_probe,
> - .remove = meson_drv_remove,
> .driver = {
> .name = "meson-drm",
> .of_match_table = dt_match,
> --
> 1.9.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the linux-arm-kernel
mailing list