[PATCH v2 09/13] ARM64: dts: meson-gx: Add support for HDMI output
Neil Armstrong
narmstrong at baylibre.com
Tue Apr 4 01:10:24 PDT 2017
On 03/21/2017 04:25 PM, Neil Armstrong wrote:
> Add HDMI output and connector nodes.
>
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
> .../arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 39 ++++++++++++++++++++++
> arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 32 ++++++++++++++++++
> .../boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 23 +++++++++++++
> arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 23 +++++++++++++
> arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 12 +++++++
> .../dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 23 +++++++++++++
> arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 13 ++++++++
> .../arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts | 23 +++++++++++++
> arch/arm64/boot/dts/amlogic/meson-gxm.dtsi | 3 ++
> 9 files changed, 191 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> index 7a078be..a84e276 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
> @@ -98,6 +98,27 @@
> clocks = <&wifi32k>;
> clock-names = "ext_clock";
> };
> +
> + cvbs-connector {
> + compatible = "composite-video-connector";
> +
> + port {
> + cvbs_connector_in: endpoint {
> + remote-endpoint = <&cvbs_vdac_out>;
> + };
> + };
> + };
> +
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&hdmi_tx_tmds_out>;
> + };
> + };
> + };
> };
>
> /* This UART is brought out to the DB9 connector */
> @@ -188,3 +209,21 @@
> ðmac {
> status = "okay";
> };
> +
> +&cvbs_vdac_port {
> + cvbs_vdac_out: endpoint {
> + remote-endpoint = <&cvbs_connector_in>;
> + };
> +};
> +
> +&hdmi_tx {
> + status = "okay";
> + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> + hdmi_tx_tmds_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> index 94c6f95..0dda058 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
> @@ -465,6 +465,38 @@
> cvbs_vdac_port: port at 0 {
> reg = <0>;
> };
> +
> + /* HDMI-TX output port */
> + hdmi_tx_port: port at 1 {
> + reg = <1>;
> +
> + hdmi_tx_out: endpoint {
> + remote-endpoint = <&hdmi_tx_in>;
> + };
> + };
> + };
> +
> + hdmi_tx: hdmi-tx at c883a000 {
> + compatible = "amlogic,meson-gx-dw-hdmi";
> + reg = <0x0 0xc883a000 0x0 0x1c>;
> + interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> +
> + /* VPU VENC Input */
> + hdmi_tx_venc_port: port at 0 {
> + reg = <0>;
> +
> + hdmi_tx_in: endpoint {
> + remote-endpoint = <&hdmi_tx_out>;
> + };
> + };
> +
> + /* TMDS Output */
> + hdmi_tx_tmds_port: port at 1 {
> + reg = <1>;
> + };
> };
> };
> };
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> index 4cbd626..a2c999f 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
> @@ -152,6 +152,17 @@
> };
> };
> };
> +
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&hdmi_tx_tmds_out>;
> + };
> + };
> + };
> };
>
> &uart_AO {
> @@ -245,3 +256,15 @@
> remote-endpoint = <&cvbs_connector_in>;
> };
> };
> +
> +&hdmi_tx {
> + status = "okay";
> + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> + hdmi_tx_tmds_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> index 4a96e0f..1c96fc8 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
> @@ -135,6 +135,17 @@
> };
> };
> };
> +
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&hdmi_tx_tmds_out>;
> + };
> + };
> + };
> };
>
> /* This UART is brought out to the DB9 connector */
> @@ -250,3 +261,15 @@
> remote-endpoint = <&cvbs_connector_in>;
> };
> };
> +
> +&hdmi_tx {
> + status = "okay";
> + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> + hdmi_tx_tmds_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> index 04b3324..9716e65 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
> @@ -524,3 +524,15 @@
> &vpu {
> compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
> };
> +
> +&hdmi_tx {
> + compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
> + resets = <&reset RESET_HDMITX_CAPB3>,
> + <&reset RESET_HDMI_SYSTEM_RESET>,
> + <&reset RESET_HDMI_TX>;
> + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
> + clocks = <&clkc CLKID_HDMI_PCLK>,
> + <&clkc CLKID_CLK81>,
> + <&clkc CLKID_GCLK_VENCI_INT0>;
> + clock-names = "isfr", "iahb", "venci";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
> index cea4a3e..8873c05 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
> @@ -127,6 +127,17 @@
> };
> };
> };
> +
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&hdmi_tx_tmds_out>;
> + };
> + };
> + };
> };
>
> &uart_AO {
> @@ -219,3 +230,15 @@
> remote-endpoint = <&cvbs_connector_in>;
> };
> };
> +
> +&hdmi_tx {
> + status = "okay";
> + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> + hdmi_tx_tmds_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> index fe11b5f..9dcac25 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
> @@ -44,6 +44,7 @@
> #include "meson-gx.dtsi"
> #include <dt-bindings/clock/gxbb-clkc.h>
> #include <dt-bindings/gpio/meson-gxl-gpio.h>
> +#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
>
> / {
> compatible = "amlogic,meson-gxl";
> @@ -381,3 +382,15 @@
> &vpu {
> compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
> };
> +
> +&hdmi_tx {
> + compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
> + resets = <&reset RESET_HDMITX_CAPB3>,
> + <&reset RESET_HDMI_SYSTEM_RESET>,
> + <&reset RESET_HDMI_TX>;
> + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
> + clocks = <&clkc CLKID_HDMI_PCLK>,
> + <&clkc CLKID_CLK81>,
> + <&clkc CLKID_GCLK_VENCI_INT0>;
> + clock-names = "isfr", "iahb", "venci";
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> index 5a337d3..0e68c62e 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
> @@ -100,6 +100,17 @@
> };
> };
> };
> +
> + hdmi-connector {
> + compatible = "hdmi-connector";
> + type = "a";
> +
> + port {
> + hdmi_connector_in: endpoint {
> + remote-endpoint = <&hdmi_tx_tmds_out>;
> + };
> + };
> + };
> };
>
> /* This UART is brought out to the DB9 connector */
> @@ -183,3 +194,15 @@
> remote-endpoint = <&cvbs_connector_in>;
> };
> };
> +
> +&hdmi_tx {
> + status = "okay";
> + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
> + pinctrl-names = "default";
> +};
> +
> +&hdmi_tx_tmds_port {
> + hdmi_tx_tmds_out: endpoint {
> + remote-endpoint = <&hdmi_connector_in>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
> index ddea730..fe451cc 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
> @@ -130,3 +130,6 @@
> compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu";
> };
>
> +&hdmi_tx {
> + compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
> +};
>
Hi Kevin,
Please take this one for the amlogic arm-soc DT tree.
It may need a rebase, please tell me then I'll repost this one rebased on your 4.12/dt64 branch.
Thanks,
Neil
More information about the linux-arm-kernel
mailing list