[PATCH] ARM: dts: koelsch: Correct clock frequency of X2 DU clock input

[Geert Uytterhoeven]

The X2 crystal oscillator on the Koelsch development board provides a
74.25 MHz clock, not a 148.5 MHz clock.

Fixes: cd21cb46e14aae3a ("ARM: shmobile: koelsch: Add DU external pixel clocks to DT")
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
Confirmed by schematics, user manual, and physical inspection of 2
Koelsch instances (my scope has not enough bandwidth to measure the
actual frequency).

Probably this was copied from r8a7790-lager.dts, as Lager does have two
identical crystal oscillators X2 and X13.

Note that X2 is socketed, so it can be changed.
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 59beb8402a36007b..001e6116c47c7c3b 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -292,7 +292,7 @@
 	x2_clk: x2-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency = <148500000>;
+		clock-frequency = <74250000>;
 	};
 
 	x13_clk: x13-clock {
-- 
2.7.4