[PATCH 0/3] [v2] Add basic ACPI support to the Qualcomm Technologies EMAC driver

[Timur Tabi]

This patch series adds support to the EMAC driver for extracting addresses,
interrupts, and some _DSDs (properties) from ACPI.  The first two patches
clean up the code, and the third patch adds ACPI-specific functionality.

The first patch fixes a bug with handling the platform_device for the
internal PHY.  This phy is treated as a separate device in both DT and
ACPI, but since the platform is not released automatically when the 
driver unloads, managed functions like devm_ioremap_resource cannot be
used. 

The second patch replaces of_get_mac_address with its platform-independent
equivalent device_get_mac_address.  

The third patch parses the ACPI tables to obtain the platform_device for
the primary EMAC node ("QCOM8070") and the internal phy node ("QCOM8071").

Timur Tabi (3):
  [v2] net: qcom/emac: do not use devm on internal phy pdev
  [v2] net: qcom/emac: use device_get_mac_address
  [v2] net: qcom/emac: initial ACPI support

 drivers/net/ethernet/qualcomm/emac/emac-phy.c   |  37 ++++++--
 drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 110 ++++++++++++++++++------
 drivers/net/ethernet/qualcomm/emac/emac.c       |  26 ++++--
 3 files changed, 134 insertions(+), 39 deletions(-)

-- 
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm
Technologies, Inc.  Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.