[PATCH v4 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support

[Jagan Teki]

Hi Fabio,

On Mon, Sep 26, 2016 at 7:26 PM, Michael Trimarchi
<michael at amarulasolutions.com> wrote:
> Hi
>
> On Mon, Sep 26, 2016 at 3:55 PM, Fabio Estevam <festevam at gmail.com> wrote:
>> On Mon, Sep 26, 2016 at 10:54 AM, Michael Trimarchi
>> <michael at amarulasolutions.com> wrote:
>>
>>>> Why don't you simply do like this?
>>>>
>>>>        reg_3p3v: regulator-3p3v {
>>>>                compatible = "regulator-fixed";
>>>>                regulator-name = "3P3V";
>>>>                regulator-min-microvolt = <3300000>;
>>>>                regulator-max-microvolt = <3300000>;
>>>>        };
>>>
>>> Should dts rispect the schematic connection?
>>
>> Yes
>
> So boot on and always on are used to declare their status and their
> behavionr. I don't
> see the point to not specify them in this way

Please try to understand that due to the case where we used fixed
voltage regulators on SOM as mentioned By Metteo and Michael dt nodes
should have regulator-always-on and regulator-boot-on properties. And
even we added one of our module which is already in ML[1]

Hope this is helpful conclude this thread.

[1] http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=a58e4e608bc88735581fdd9861676e522fa3c20d

thanks!
-- 
Jagan Teki
Free Software Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.