[PATCH v4 2/5] ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support

[Michael Trimarchi]

Hi

On Mon, Sep 26, 2016 at 3:47 PM, Fabio Estevam <festevam at gmail.com> wrote:
> Hi Matteo,
>
> On Mon, Sep 26, 2016 at 10:44 AM, Matteo Lisi <matteo.lisi at engicam.com> wrote:
>> Hi Fabio,
>>
>> Our SOM doesn't use external PMIC.
>>
>> We powered all devices with a fix voltage regulators that cannot be drive
>> directly from SoC so
>> any external power rail can be driven by drivers.
>
> Sure, this is fine.
>
> Why don't you simply do like this?
>
>        reg_3p3v: regulator-3p3v {
>                compatible = "regulator-fixed";
>                regulator-name = "3P3V";
>                regulator-min-microvolt = <3300000>;
>                regulator-max-microvolt = <3300000>;
>        };

Should dts rispect the schematic connection?


Michael


-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |