[v12, 0/8] Fix eSDHC host version register bug
Y.B. Lu
yangbo.lu at nxp.com
Sun Sep 25 20:14:32 PDT 2016
Any comments about this version patchset ?
:)
> -----Original Message-----
> From: Yangbo Lu [mailto:yangbo.lu at nxp.com]
> Sent: Wednesday, September 21, 2016 2:57 PM
> To: linux-mmc at vger.kernel.org; ulf.hansson at linaro.org; Scott Wood; Arnd
> Bergmann
> Cc: linuxppc-dev at lists.ozlabs.org; devicetree at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org; linux-kernel at vger.kernel.org; linux-
> clk at vger.kernel.org; linux-i2c at vger.kernel.org; iommu at lists.linux-
> foundation.org; netdev at vger.kernel.org; Mark Rutland; Rob Herring;
> Russell King; Jochen Friedrich; Joerg Roedel; Claudiu Manoil; Bhupesh
> Sharma; Qiang Zhao; Kumar Gala; Santosh Shilimkar; Leo Li; X.B. Xie; M.H.
> Lian; Y.B. Lu
> Subject: [v12, 0/8] Fix eSDHC host version register bug
>
> This patchset is used to fix a host version register bug in the T4240-
> R1.0-R2.0 eSDHC controller. To match the SoC version and revision, 10
> previous version patchsets had tried many methods but all of them were
> rejected by reviewers.
> Such as
> - dts compatible method
> - syscon method
> - ifdef PPC method
> - GUTS driver getting SVR method
> Anrd suggested a soc_device_match method in v10, and this is the only
> available method left now. This v11 patchset introduces the
> soc_device_match interface in soc driver.
>
> The first six patches of Yangbo are to add the GUTS driver. This is used
> to register a soc device which contain soc version and revision
> information.
> The other two patches introduce the soc_device_match method in soc driver
> and apply it on esdhc driver to fix this bug.
>
> Arnd Bergmann (1):
> base: soc: introduce soc_device_match() interface
>
> Yangbo Lu (7):
> dt: bindings: update Freescale DCFG compatible
> ARM64: dts: ls2080a: add device configuration node
> dt: bindings: move guts devicetree doc out of powerpc directory
> powerpc/fsl: move mpc85xx.h to include/linux/fsl
> soc: fsl: add GUTS driver for QorIQ platforms
> MAINTAINERS: add entry for Freescale SoC drivers
> mmc: sdhci-of-esdhc: fix host version for T4240-R1.0-R2.0
>
> Documentation/devicetree/bindings/arm/fsl.txt | 6 +-
> .../bindings/{powerpc => soc}/fsl/guts.txt | 3 +
> MAINTAINERS | 11 +-
> arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 6 +
> arch/powerpc/kernel/cpu_setup_fsl_booke.S | 2 +-
> arch/powerpc/sysdev/fsl_pci.c | 2 +-
> drivers/base/Kconfig | 1 +
> drivers/base/soc.c | 66 ++++++
> drivers/clk/clk-qoriq.c | 3 +-
> drivers/i2c/busses/i2c-mpc.c | 2 +-
> drivers/iommu/fsl_pamu.c | 3 +-
> drivers/mmc/host/Kconfig | 1 +
> drivers/mmc/host/sdhci-of-esdhc.c | 20 ++
> drivers/net/ethernet/freescale/gianfar.c | 2 +-
> drivers/soc/Kconfig | 2 +-
> drivers/soc/fsl/Kconfig | 19 ++
> drivers/soc/fsl/Makefile | 1 +
> drivers/soc/fsl/guts.c | 257
> +++++++++++++++++++++
> include/linux/fsl/guts.h | 125 ++++++----
> .../asm/mpc85xx.h => include/linux/fsl/svr.h | 4 +-
> include/linux/sys_soc.h | 3 +
> 21 files changed, 478 insertions(+), 61 deletions(-) rename
> Documentation/devicetree/bindings/{powerpc => soc}/fsl/guts.txt (91%)
> create mode 100644 drivers/soc/fsl/Kconfig create mode 100644
> drivers/soc/fsl/guts.c rename arch/powerpc/include/asm/mpc85xx.h =>
> include/linux/fsl/svr.h (97%)
>
> --
> 2.1.0.27.g96db324
More information about the linux-arm-kernel
mailing list